Search results for query: *

All 4 links have same down speed. All 4 IP addresses are dynamic. And all 4 links have the same gateway. Does setting up BGP really necessary for this to work? Is there other way to go? Thanks, Microbyte [medal][medal]

Hi, We have 4 ISP feeds into cat3750. We need to distribute that over 20 different users. What is basic configuration required for load balancing 4 ISPs? Thanks in advance! Microbyte [medal][medal]

Routed MAC aging time is exactly what it says. Once these learned mac-address has reached the configured age time (300 seconds by default), the switch flushes out of its memory. Switch re-learns these by pings performed by each node. As far as global time out, I am not quite sure about it. But...

PIM-DM is enabled by each inter vlan 6509a has... interface vlan13 ip address 192.168.13.2 255.255.255.0 no ip redirects ip pim dense-mode standby 13 ip 192.168.13.1 standby 13 timers msec 100 msec 300 standby 13 priority 200 standby 13 preempt 6509b has... interface vlan13 ip address...

This is simple connections. PC1 // \\ 6509a = 6509b \\ // PC5 PC - computer/workstation dual homed using HSRP where 6509a has the priority. 6509 - catalyst 6509 with sup2 - fast ethernet link = 2 gigbit link using port-channel There are many other connected PCs...

viper and voltron, What do you recommend the hsrp timer to be? Don't want to lose any data as well as avoid any flapping. If I can't have both, what would be the compromised hsrp timer value? Sirlollypop, I didn't do any other debug command. Above command is temporarly removed because of CPU...

Thanks to all! I've decided to go with layer-3 method because I was afraid of spamming tree :) causing any issue with having two gateways in meshed configuration. first 6500's configuration, interface FastEthernet4/1 Ip address 192.1.1.2 255.255.255.0 No ip redirects Ip pim dense-mode Duplex...

Hi, This is the network, 6509a / | A - US | \ | 6509b A - computer node US - unmanaged switch 6509a - Cat6509 6509b - Cat6509 Two Cat6509 are linked via layer-2 trunking. What is the best method of configuring 6509 to support redundancy? I appreciate all your...

Hi, I am planning to take CCNP composite exam 642-891. What are the differences between new exam and the old exam which expires on Dec 31st? THanks, Microbyte [medal][medal]

Hi I am dealing with limited choice in designing HSRP configuration. There are three end nodes and two catalyst 6500s. A --- Switch 1 ----- C || B --- Switch 2 ----- C Switch 1 and Switch 2 are linked via trunk (layer 2). between Node A and switch 1 are layer-3 link, and as well as...

Hi, I have these snmp-server config lines here, snmp-server host 10.10.10.1 informs or snmp-server host 10.10.10.1 traps or snmp-server host 10.10.10.1 version where is the difference between informs and traps? if I choose to select version, will it display both information and traps...

thanks JOAMON Microbyte [medal][medal]

vipergg, Sorry, it's for the native IOS. Do you know how to do port mirroring? Thanks. Microbyte [medal][medal]

Hi, I have two questions, 1. how to configure to port mirroring on cat6500? 2. how to delete other vty session that is currently logged on to the switch? Thanks! Microbyte [medal][medal]

Thanks for replying. What is the difference between these two commands? "snmp-server enable traps linkdown linkup" and "logging event link status default" ?? Microbyte [medal][medal]

First thing comes out of my mind is the interface may be in shutdown status. If it is not, go to that interface config mode anyway and give "shutdown" then type "no shutdown" again. Sometimes toggling helps. Microbyte [medal][medal]

Here's sample topology 6500 switch A --- ServerA< | 6500 switch B --- Server A is dual-homed with ip address 10.0.0.1 is connected to core 6500 switches armed with HSRP. ServerA has 2 ethernet ports which share 1 IP address (1 MAC) and has a capability to failover to its...

Thanks, you've been great help! Microbyte [medal][medal]

Yes! the switch has been converted from hybrid to native IOS. So from my understand, c6sup22-js-mz.121-23.E1.bin is the main native IOS. (~20meg) c6msfc2-boot-mz.121-22.E2.bin is the mini IOS (~1 meg) c6msfc2-psv-mz.121-22.E2.bin is hybrid IOS (~14 meg). Right? Microbyte [medal][medal]

Oh, I thought c6sup22-js-mz.121-23.E1.bin stored in sup-bootflash is the main IOS image? Isn't it? Microbyte [medal][medal]