Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Search results for query: *
- Users: ITnetworker
- Order by date
-
Router newbiw needs help with 805 configuration.
by default routers forwards any udp and tcp port that are not broadcasted unless it is denyed by extended access lists if you want to send a broadcast tcp or udp port to specified address via the router use the following command ip helper-address <ip-address> on the interface which you will...- ITnetworker
- Post #3
- Forum: Cisco
-
Router newbiw needs help with 805 configuration.
by default routers forwards any udp and tcp port that are not broadcasted unless it is denyed by extended access lists if you want to send a broadcast tcp or udp port to specified address via the router use the following command ip helper-address <ip-address> this is the command it will allow...- ITnetworker
- Post #2
- Forum: Cisco
-
Modem disconnect ?
check the username and password at each side of the connection in the line configuration at the 1600 end u add the username and password of the 2600 router and vise versa because the problem of disconnecting may be beacuse of the negotiaion failure check it by debugging the ppp negotiaion and...- ITnetworker
- Post #4
- Forum: Cisco
-
1720 Configuration/NAT
the normal thing is that you cant ping any ip inside your subnet to check the the real ips is working ok try to traceroute the ip of the serial interface from outside using www.visualroute.com live demo it replies and gives the destination of the ip of the serial ip is working ok the wrong in...- ITnetworker
- Post #4
- Forum: Cisco
