Search results for query: *

Which report are you running

Same as TN2215 Hope this helps.

Hi, You need to hit return twice after entering ;ME to get the logon prompt. If you get a flashing cursor and no logon the port could be locked, try this command: - First enter ;EM Y at the 1> Prompt (This switches on echo mode, so you can see what your doing). Second enter ;CM and hit enter...

You are correct the TN747B is hot swappable, but you will need to change like for like. Other wise it time to reprogramme.

The simple answer is no. As you are changing board types you will need to change the config for both boards. Also you are changing a 16 port (TN746) for a 24 port board (TN793). You will also have the same prob with digital boards as well 16 port to 24 port.

First do you have a SAT ( 715 or 513). If you do there is a a printer port on the back of it. You will need to activate the port through the terminal set up. Next you will need to go to page 4 ( on R9 )of system features and set system printer end point to EIA ( if not using CDR output ). Other...

I am using ASA 1.9 with XP Professonal, as yet no probs.

Try ECS Release 9 Administrator's Guide Page 1300 of 1738. All the best.

In order for the Auto attd to function you need to record the greeting with the options and the third page on the AA form needs to be administered. Hope this helps :-)

If you run test board. What are the errors that are being returned for this board? Are you using UTP or Teleco. cable?

If this is the last eight on the card. The card has blowen and needs to be replaced.