Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
FC4700 - Commit of Base failed
I have not used the CLI, but used Navisphere 5.3 and clicked Commit under Storage System Properties / Software. BASE Rev is 08_51_70. All drives are 73GB / 10K. Yes, I want to reinitialize the PSM. I hope this will solve the commit problem. But i am not sure if the reinitialization will help... -
FC4700 - Commit of Base failed
I have a FC4700 that i have initialized. The creation of the PSM was successfull. SPA and SPB sees each other. Global Security is configured, and the domain is created with SPA and SPB as members. All 10 drives are inserted. The PSM is created as RAID1 on disk 8 and 9. I have tried several... -
Which DIMM types work in the FC4500
We have a FC4500 without the DIMMs installed. What DIMM types and sizes can be used in the FC4500 ? The pinout looks like standard PC133 DIMMs. -
36GB 7.2K drives spinning up and down on FC5600
The drives are the IBM DRHL-36L OEM types. I don't know the firmware code, and have not found it on the disk label. The disks are in the original EMC caddys that are labeled with the 36GB/7.2k and serial number info. I have read somewhere in an old support bulletin board, that IBM and seagate... -
List of Seagate and IBM drive firmware for clariion systems
I'm looking for a list of all officialy working firmware versions for the different types and sizes of Seagate and IBM drives for clariion FC5400, FC5600, FC4500 and FC4700 systems. It will also help, if everybody that has some drive types in one of the above systems, can post the type and... -
36GB 7.2K drives spinning up and down on FC5600
The error log shows some (CRU Type Unsupported) and (CRU Powered Down) messages. But otherwise the log looks ok. It seems to me, that this Flare and or Prom does not support this drive type ? Or maybe the drives do not have the correct Firmware on it ? The other possibility is that the IBM... -
36GB 7.2K drives spinning up and down on FC5600
The drives 0-2 are not from the 5400, but are working Flare drives from the 5600. This are 36GB 10k drives. They spin up properly and the Flare is booted and i get the fcli prompt. I have already looked around in the settings in fcli and also in the Prom monitor, but have no clue what to change... -
36GB 7.2K drives spinning up and down on FC5600
I have original EMC labeled drives part nr. PN005045719, 36GB 7.2K. I use a FC5600 with Flare 5.11.53 and Prom 3.21. When i insert this drives and start the FC5600 the drives will spin up and down 10 to 20 times, and at the end the drives are not recognized. The FCLI shows PWR during spin up and...
