Search results for query: *

Hi I am mapping luns to a DMX FA for an HPUX host. The host currently has luns from a symmetrix 5 presented. When I map luns to the DMX FA should I use different VBUS, Target entries then the currently mapped luns on a symmetrix 5.

looking at clones rather than having bcvs for multiple mirrors. Allows for more copies. Any thoughts/experience on symclones.

is there any way to get around the 4 mirror position limitation on a dmx.

Is lun 000 still required for RHEL to scan all SCSI devices on the emc array

yes exactly, The R1 standard is also in sync with its R2. Can the BCV that is 2-mirr and in addition is R1, be srdf'ed to an R2 BCV 2-mirr as well.

Can you have and R1-2way-Mir-BCV established to an RDF1+Mir. Also the RDF1+Mir is in sync with the RDF2+Mir.

Running Connectrix Manager 7.02 with Mcdata switches. I have a host attached to a port which posts a large number of 'Address ID Errors' as seen via CM7.0.2 Any idea on how to troubleshoot this error. Cables have been checked.

emulex

www is logged in to fabric / switch port port is listed

mcdata switches. will have the fibre analysed

difficult one as wwn is logged in on one FA already. FA settings for the 2nd FA are ok for windows hosts.

Have checked lun masking - all is correct.

Have an hba zoned to 2 FAs on a DMX. On one FA it is logged in successfully i.e Logged On Identifier type Node name Port name FCID In Fabric wwn Fibre Null Null 10002 Yes Yes On the 2nd FA its is not logged in...

The images for the original primary do not exist. Different retention levels. Does the duplicate automatically become the primary in this case

I have used ITC to create a second copy of the backup. The primary tape is no longer available. How can a restore from the secondary be handled. Is this automatic within netbackup of does the secondary have to be made the primary.

fixws in mp3

I am trying to backup w2k system_state and get an invalid file specification error. Environment is nbu 5.0 mp1. Client software is normal w2k client mp1 - not advanced client. Anyone come across this before and how did you resolve.

I have 2 12000s in a single fabric accross a DWDM link. Some zone changes have been made resulting in the event detailed 'segmented zone conflict'. This has been initiated by the zone changes not being saved 'cfgsave' and then the Control processors failing over. Any ideas on how this can be...

Thanks

I have ISLs in place. I would like to activate the trunking license. Will this have any impact on hosts access to EMC storage on activation. Thanks