Search results for query: *

Thanks Roddy, I'll look for those Model numbers you mentioned

Thank-you all for the information.

Sorry. Meant to say IF you know of a model number Of a phone THAT will ring

I'm not sure what the bogen system sends out. I just know that a ringer inside the Modified phones ring, but if you replace the phone with a standard analogue phone it won't ring. And yes, the ring is sent through the tip and ring pair just like any other analogue phone. I would just like to...

Thanks http://www.tek-tips.com/userinfo.cfm?member=jrgood0852. I'll check this Out

Thanks for the reply, but maybe I didn't state my question right. I know that standard analogue sets work on 90 volt 20 hz ringing and I know what pair to use for the tip and ring. The problem is Bogen doesn't push out 90/20 so the phone doesn't ring. I want to know what voltage the Bogen...

Could someone please tell me what analogue telephones are compatible with the Bogen multicom 2000 system? I know any standard phone will function okay, but will not ring because of the 90 volt ringers. What phones will ring, and what is the ringing voltage specification of the Bogen system...

I set up an IPO in Quick mode to emulate a Partner system for the customer so they could do some of their own programming and keep it similar to their old Partner system.Is there a timer or setting I can use that will cause the call to disconnect from the system faster when the caller hangs up...

Thank you AACon. I know how to set level 2 in the user tab of the user's phone rights. I thought the last reply said there was level 2 programming in the user's Button programming section for the self administer button as well. Ultimately what I'm looking for is how to reset pass codes and do...

Thanks montyzummer. I found the Self Admin button but how do you set it to level 2? Also, will that let me reset passcodes and change names, and system time and date?

Ground Start lines need a ground connected to the trunk to get dial tone. mainly used in PBX's. the pbx would momentarily supply a ground to the line to provide dial tone, where as loop start lines do not need a ground. at one time the CO provider tarrifed the lines differently and Ground start...

Does anybody know if and how you can Access the IPO and the Embedded Voicemail by a 1416 set to do voicemail admin, such as resetting passcodes,changing names, and intializing mailboxes? Also to do phone system admin such as setting the time and date, and programming system speed dials? This is...

-I've checked a couple of phone admin guides and for the 1416 set it says to press the "Admin" button on the set and scroll down to system administration. i am connected to port 1-ext10-of the IPO but I can't find the admin button. I"m assuming that it is the menu button, but pressing it leads...

Thanks for the reply, however I couldn't download the quick admin guide from the site - File factory. I signed up but couldn't access the doc.Is there another site I can access this guide? Appreciate the help AACon, thanks. Tim

Question on IP Office embedded voicemail: Is there a voicemail system admin manual that the customer can use to do simple voicemail changes such as password resets, changing names and setting the time? I have a new system on a 500V2 system level 7.0 and the IP Office is not connected to the...