Search results for query: *

Try Telecom Knowledge: the training division of iSKY Europe Plc Clevedon Hall Victoria Road Clevedon Bristol, BS21 7RQ Tel: + 44 (0)1275 344144 DDI: + 44 (0)1275 344160 Fax: + 44 (0)1275 344100

I've found that pinouts on the RJ11 end vary but the BT connection is alwayw pins 2,3,& 5. The A & B legs are on 2 & 5 the bell circuit is on 3

Siemens usually ship a system with an address of 88.0.0.1. This can be change with the SETENV command within ASMI.

Thanks jkupski That's pretty much the same as I found, but by a different route. I know having the wrong time on a switch isn't the end of the world but it can be useful tracking anomolous events sometimes. Perhaps HP may be planning to look at this at thier next S/W release.

Try key system working.

If I have a stack of switches managed via one IP address, how do other members of the stack synchronise time. The commander is using SNTP? Do they each need an IP address of thier own along with the address of the SNTP server etc?

If I have a stack of switches managed from one IP address, how do members synchronise time if the commander uses SNTP? Do they each need an IP address of thier own?

I'm a real newbie at this stuff and need to find out how to get 4108s and the like to set thier clocks automatically.

Final question. DCE usually provides clocking. In this case which one?

Do you have the pinning for the non-standard DB25 x21 I/F?

I appologise for replying somewhat late. Try this posting on the Siemens Realitis theme.

In the UK long 2MBPs point to point circuits tend to be expensive and I really don't need 30 trunks between each site. I'm looking at deriving trunks from the company's existing data network. Digital Private Network Signalling System is a UK developed 30B+D system that pre-dates Qsig. My...

At present we have a number of traditional TDM PBX. These deliver all that we need to the users. We are considering linking them with a few trunks to permit carrier by-pass, centralised operator, centralised voice-mail etc. As a newbie to this whole VoIP thing, what do I need to do the DPNSS -...

I was looking more for something implemented within a contact centre for regulatory compliance.

Can anyone give general advice on the application of voice recoding in a CCM environment. With our old (traditional) PBXs it was easy to correlate a call to an extension at a specific time. Any ideas?

I have an NBX system that I need to apply voice recording to I can attribute a particular recording to a specific phone at a particular time. Any suggestions/recommendations.

My course notes from Beeston suggest Route Optimisation dioesn't mix well with LCR. Or, perhaps I missed that bit.

Does anyone know the status of VoIP support on BC9 and latter?

Having misplaced my Siemens course notes some time back I've now been asked to configure a Key System. I remember some of the stuff about setting Terminal Profiles etc. but would really appreciate a bit of assistance. Can anyone help me please.

You could always REO it as an emergency phone.