Recent content by yuvami

Hi I have 2 pbx CSE 1000 7.6, the site A has a voicemail Octel connected and the site B was connected before for a PRI to the site A. the lamps working ok, but I have to change the PRI for Ip trunks (SIP) and now the lamps at the site B are not working when someone has a message, I checkef the...

Let me try that, I haven't used the LCR before....

Hi I have an Ip office 500 connected with H.323 to an LG-Nortel Ipldk60, the calls between the extensions are working ok, the problem that I have is when I try to call from the LG taking and ISDN pri trunk of the Ip office for an external call....checking at the Ip office system status I see the...

Yes I know, I'm not sure is the IPO is waiting to "see"an extension, but if the call comes from a Ip trunk....is like a Tandem. I'm not sure if the trunk-trunk connection is permited at the T1, or how can I set up it.

Hi I have an Ip Office R9 (IPO)connected via H.323 trunks to LG-Nortel, the calls between them are working extension to extension. The problem that I have is that the users form the LG need to make call using the T1 connected to the Ip Office but the user received a disconnected tone, I made the...

Thank you Matt, now is working.

Hi Matt, In wich part do I need to add the SXXXXXX, at the ARS? I put then the code 9N and at telephone number the SXXXXXX?

Hi, I have an Ip Office 500 with a T1-PRI connected , before set up the DID to the telephones, the outgoing calls work fine, but when I set up with the MSU tool the DID to the extension, I can not dial out if that extension has a DID...if I deleted the DID (for the incoming route) I can dial...

Thank you, the DIS SERV (X) command works!

Hi, I have a CSE1000E r5,I set up a second T1 ISDN connection with IFC ess5, the problem is that some channels are FE MBSY, I tried to disable each chanel and enable again and still are FE MBSY but if I make a dial in call the chanel get idle, Then I have to make some incomming calls to put all...

you need to split the tunnel to have access for the internet.

But, how you tell to each IP Office to reach each other?

Hi, we worked a lot with E1, the process is very similar. at Ld 17 you define the loop at the DTI2 X, X is the loop number. If you are going to use a PRI2 (Pri E1) then you have to put the llop number at the prompt PRI2 and to set up the d-channel at the Adan Dch prompt. At the Ld 73 you...

I already do that, the Ip iffice 500 has the ip 172.18.100.1, at the Ip office 400 I set up the Ip 172.18.100.50 under the tab LAN1. Thers ia a TAB "network topology"and appear something like STUN server Ip addres....the two equipments have the same ip address there...but I don't have idea what...

Hi, I have an Ip Office 500 and other Ip office 406, the customers has a link between the buildings then I need to set up the configuration to connect them at the same network... before the customers has other connection with vlan toward a carrier but the connection changed to a direct...