Hi, I have an Ip Office 500 with a T1-PRI connected , before set up the DID to the telephones, the outgoing calls work fine, but when I set up with the MSU tool the DID to the extension, I can not dial out if that extension has a DID...if I deleted the DID (for the incoming route) I can dial out.
I have the T1 with line group 0 for incomming and outgoing.
Any idea?
The DID's numbers work fine
I have the T1 with line group 0 for incomming and outgoing.
Any idea?
The DID's numbers work fine