Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by YankeeNation

  1. YankeeNation

    Accessing My BCM50e Through Nortel Business Element Manater

    Why don't you just go in using the OAM port with a crossover cable. Just change your ip address to 10.10.11.2. As the ip of your BCM OAM port should be 10.10.11.1. Then you would be able to go in and see what your ip address of the box is. Money may not buy you happiness, but in MLB it buys you...
  2. YankeeNation

    nortel door phone

    I would just make the Hunt Group extention be an answer DN of the doorphone Ext. Then whenever the door phone is pressed it should ring the members of the HG. Money may not buy you happiness, but in MLB it buys you CHAMPIONSHIPS. (27 and counting). MLB,stands for Major League Baseball for you...
  3. YankeeNation

    Set only dials 1 extension

    No need to take it apart, just unplug the phone, then take some 409 cleaner & spray some on the phone, & with an old tooth brush work it around the buttons. If it is an M series phone the buttons are easily removed and cleaning is much easier. allow phone to dry and plug back in and do a feature...
  4. YankeeNation

    BCM50 upgrade 1.0 to 6.0

    I realize you can't go directly from 1.0 to 6.0, but what are the possible ramifications we can expect to encounter? We will go from 1.0 to 3.0 then 3.0 to 6.0 i believe. Barring any major problems during upgrade, what will be lost, besides just VM messages. Is there anything else to worry...
  5. YankeeNation

    change number of rings before voice box picks up

    Also if you use caller ID, you will no longer recieve info if the phone does not ring at least twice. Not sure if this pertains to you but just FYI. Money may not buy you happiness, but in MLB it buys you CHAMPIONSHIPS. (27 and counting). MLB,stands for Major League Baseball for you slower...
  6. YankeeNation

    NAM 4.0 problem

    P.S. I have tried switching ports multiple times, but problem still persists. you can call in once and get ext. not available, then the next time it might go through just fine, like it isn't recognizing the DTMF?????? Money may not buy you happiness, but in MLB it buys you CHAMPIONSHIPS. (27...
  7. YankeeNation

    NAM 4.0 problem

    Have a MIC's 4.1 with a 4.0 NAM VM. Periodically when you dial extensions within the switch it will say extension not available. Not sure if it might be a DTMF problem or something with the KSU. Any suggestions are much appreciated, thanks in advance. Money may not buy you happiness, but in MLB...
  8. YankeeNation

    Caller ID recall on 8x24DS

    Have to have call log set up on that extension. Unfortunately if you don't have log already set up, you can't review any of the calls previous to this set up. You will have a pool of probably 600 logs to distribute however you see fit, you can put all of them on one ext. or you can divide them...
  9. YankeeNation

    Switching analog lines from Norstar to BCM 400 3.7

    Is the BCM 3.7 or 4.0 and higher? 3.7 uses unified manager whereas the 4.0 or higher uses element manager. What programming are you trying to accomplish? you first need to go into telephony resources and tell the KSU what type of module is in the BUS that corresponds. Money may not buy you...
  10. YankeeNation

    Switching analog lines from Norstar to BCM 400 3.7

    The card in the BCM needs to be a GATM not GASM, the GASM is for analog stations, not trunks. But with the GATM the lines are two on two off just like in the Norstar. Money may not buy you happiness, but in MLB it buys you CHAMPIONSHIPS. (27 and counting). MLB,stands for Major League Baseball...
  11. YankeeNation

    New to Norstar and callpilot

    You also have to upgrade your software on your KSU (It sounds alot like you have a CIC's cabinet). Anyway you r software has to be at least 6.1 to recieve caller ID and will need programming under each set/line for CI. It will also only appear on sets that are ringing on incoming calls. Money...
  12. YankeeNation

    Screwed up phone move... pls help

    Changing the DN won't change the target lines though. you will need to go into lines admin/ under target lines, find your line with the right received digits and apply to your ext. Probably lost all button programming, try feature *0 check all your buttons for correct features Money may not buy...
  13. YankeeNation

    RAD did not respond

    make sure you are hooked up to a good port on the switch. if the port is good go under maintanance in the programming and see if the port recognizes the RAD. also try hitting feature 9** on a programming phone and see if it asks for password, if so then you know the RAD is functioning correctly...
  14. YankeeNation

    Defaulting I.P. 1140e admin password

    I am trying to access an 1140e set that has a password already installed, but no one seems to know the right password. i already tried the 26567*738 with no luck, any suggestions would be greatly appreciated, thanks in advance. Money may not buy you happiness, but in MLB it buys you...
  15. YankeeNation

    BCM 50 Analog port

    Those are your internal analog trunk lines. They are not a seperate module as you described. Check to make sure your amphenol 25 pair connector is securely in place on the front of the BCM, also if you have a butt set or analog phone you can test the CO lines just to make sure it isn't the...

Part and Inventory Search

Back
Top