Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by WikikT

  1. WikikT

    Hunt group to 1st Alternate route call not going

    Unfortunately I could not Telnet with port 1752 but I could with default Telnet port. When I tried to call there were no call log traces found however I found the attached info. Welcome to the SX-2000 (vxTarget) login: system Password: USER Logged Out. 0 view error(s), 0 table error(s)...
  2. WikikT

    Hunt group to 1st Alternate route call not going

    I created a ring group and put overflow as 609 and it worked like a charm. Thanks You are Awsome Bro! Unfortunately I have no way to test 608 locally since I am supporting remotely. I tried to configure Shoretel communicator softphone but it gives me error "server cannot be reached". I tried...
  3. WikikT

    Hunt group to 1st Alternate route call not going

    Yes as I mentioned above I did the call rerouting first alternative I put a number 608 which is on speed dial set to go to my cell and in call rerouting I enabled this as a 1st choice. I cannot see the call log to toubleshoot further. I enabled smdr too. Any ideas? Thanks
  4. WikikT

    Hunt group to 1st Alternate route call not going

    I have Mitel 3300 and I set up a hunt group with three numbers in call rerouting numbers (1101,1102,1103) added to it. Those three numbers have been added to buttons on each users/extensions. When I call main number it hits the hunt group and rings the extensions after 4 rings it is programmed...

Part and Inventory Search

Back
Top