Recent content by wacker43

I have a 200 AX controller and afetr a power outage my system Identity in form 4 option 101 is 000000000000. MItel options password amd MOC are still there. Any ideas on what we can do?

running MCD 7.0 SP1 PR1, and when I install a LIM on a 5330E set and tell it "Failover only" is set to NO, I never get the prompt to "select program key" to program a line key for the line interface. Anyone come across this yet or know what I may be doing wrong? Followed the LIM instructions...

KB, so there is nothing that can be done so that the guests get a recording that they set the wakeup corrected other then the dial tone?

I have an SX 200 AX controller and the guests are able to set wake ups but only recieve a dial tone for confirmation. Is there a way to have a recording saying the wake up has been successfully scheduled?

Thanks Panda!!

Is there a way to tell if I have a Stratum clock in a 200ICP mx controller without taking it out of the rack and opening it up?

So, I dont need to fill out the "cluster element assignment"? Just build my IP trunks and configure ARS?

Is it possible for me to cluster a MCD 6.0 and ICP 9.0 together for 4 digit dialing with IP trunks, or do I need to upgrade the older system? Thanks

Thanx Lundah..

I have a 3300 with a digital T1. For some reason i can get 9911 to work but 911. Leading digit is 9, return dial tone is YES. then I have "11" for 911, UNknown and sent to a route list. When its dialed, nothing happens,just sits and waits. I have tried 911, unknown and my route list, but same...

Is there a maximum number of BONS cards you can install in a SX 200 ICP MX controller. I currently have 8, with 8 licenses, and they do not manufacture the regular ONS/CLASS line card anymore.

Got it Panda!! I was so close.... much appreciated!!

I believe I have every option turned on in all form including Form 30. I got to the set which is a 4025, hit the superkey, go to Forwarding but it will never except more then the 4 digits? I have other posts, but am stumped on this one. has to be an easy fix...

No, not yet... currently there are NO alarms at all in the log, other then me logging on, and the Status light is still RED. Weird..May just put the newest SU patch on it and see if that takes care of it.

Thanks for the info, I have never seen this in any BCM manual.. Great to know.