Search results for query: *

I have a 200 AX controller and afetr a power outage my system Identity in form 4 option 101 is 000000000000. MItel options password amd MOC are still there. Any ideas on what we can do?

running MCD 7.0 SP1 PR1, and when I install a LIM on a 5330E set and tell it "Failover only" is set to NO, I never get the prompt to "select program key" to program a line key for the line interface. Anyone come across this yet or know what I may be doing wrong? Followed the LIM instructions...

KB, so there is nothing that can be done so that the guests get a recording that they set the wakeup corrected other then the dial tone?

I have an SX 200 AX controller and the guests are able to set wake ups but only recieve a dial tone for confirmation. Is there a way to have a recording saying the wake up has been successfully scheduled?

Thanks Panda!!

Is there a way to tell if I have a Stratum clock in a 200ICP mx controller without taking it out of the rack and opening it up?

So, I dont need to fill out the "cluster element assignment"? Just build my IP trunks and configure ARS?

Is it possible for me to cluster a MCD 6.0 and ICP 9.0 together for 4 digit dialing with IP trunks, or do I need to upgrade the older system? Thanks

Thanx Lundah..

I have a 3300 with a digital T1. For some reason i can get 9911 to work but 911. Leading digit is 9, return dial tone is YES. then I have "11" for 911, UNknown and sent to a route list. When its dialed, nothing happens,just sits and waits. I have tried 911, unknown and my route list, but same...

Is there a maximum number of BONS cards you can install in a SX 200 ICP MX controller. I currently have 8, with 8 licenses, and they do not manufacture the regular ONS/CLASS line card anymore.

Got it Panda!! I was so close.... much appreciated!!

I believe I have every option turned on in all form including Form 30. I got to the set which is a 4025, hit the superkey, go to Forwarding but it will never except more then the 4 digits? I have other posts, but am stumped on this one. has to be an easy fix...

No, not yet... currently there are NO alarms at all in the log, other then me logging on, and the Status light is still RED. Weird..May just put the newest SU patch on it and see if that takes care of it.

Thanks for the info, I have never seen this in any BCM manual.. Great to know.

I stated in the post, that it is on even after I clear the alarms. There was an alarm in there for the T1 being in free run, but I cleared all those and reset the LED's, and it does not go out.

I have a BCM 450 R6.0 that has a red status light even after I clear alarms and reset status light. I installed a patch inn June, which was SU 003201101-2. If I do a reboot, it will clear, but always comes back on after an alarm, then will not ever go out. Wondering if anyone has had this...

here is the scenerio, we have Cisco sets that are connected by a PRI to our OPT 61, I can get an inbound call transferred from a digital set over the PRI to cisco, but not the console. All I did to make the sets work is FTTU in CLS, but not sure how to make it work for the console.

I do not have a wake up call button on the console for rooms on a 200 ICP. I have lodging and VM PMS enabled in form 4, and 101 in form 3 for COS option. First time I had a system with the VM PMS option. We are currently not using any PMS, is this the reason?

Thanks KWB!! Is there any way of having a key on a set other then an LDN of the console? Or will the night answer key light if I put that on the set?