Recent content by sstarkov

XCT 000 <--- Reason of SCH5739. Loop 0 is already busy.

You're welcome. Good luck.

SCH5670 For Primary loop, the slot must be set equal to the clock controller slot number. For secondary loop, the slot must not set equal to the clock controller slot number. PREF 6 <----

Two CC in diff MGC PRI2 example FEAT syti MGCLK 0 0 1 PREF 0 0 1 SREF MGCLK 4 0 1 PREF 4 0 1 SREF CCGD 15 CCAR 15 EFCS NO ld 60 .ssck 0 0 ENBL CLOCK ACTIVE CLOCK CONTROLLER - LOCKED TO SLOT 1 PREF - 1 SREF - AUTO SWREF CLK - ENBL .ssck 4 0 ENBL CLOCK ACTIVE CLOCK CONTROLLER -...

Hi ld 96 STAT DCH 10 LD 60 stat <loop>

I agree with bignose21. Use CDP.

ACOD usage in IDC is not correct solution. IMHO. If any calls logs (DCH ?) on DID number?

The documentation says the variable is type DN and this is right.

Use CallPilot ACCESS ports Chapter 4: Avaya Communication Server 1000 voice processing system configuration requirements ACCESS requirements Contact Center Manager Server generates ACCESS traffic when it communicates with the integrated voice processing system (Avaya CallPilot®) to obtain the...

Make your choice correctly. The IVR system <Yes> doesn't exist.

Such as CallPilot, MPS, AMS

This? PROBLEM CLARIFICATION Below are the additional findings during troubleshooting. 1. ROOT password was expired 2. Call Server's ADMIN2 password was giving notification to change when removed it from sec domain and tried to login. SOLUTION LD 117 --> UNREG UCM SYS then login with ADMIN2...

Hi From Avaya Support. On your responsibility. SOLUTIONS ========== 1. Install the latest patches and service pack on UCM/Signaling server, The patches on the server are not the latest. 2、Regenerate the SSH key, and rejoin CS to Primary UCM ld 117 => ssh key generate => unreg ucm cs...

Hi. What IVR system used?

Hi StanleySteamer. You have made a small mistake in the given example. COLLECT 1 DIGITS INTO menu_choice_cv