DON'T ASK WHY 1

[PERRYPJ]

Have a request from a customer to set up a DID number to access a page trunk, so I put the DID number in the IDC table and pointed it to the ACOD of the page trunk. I get a busy have checked TGAR NCOS. Have I missed anything, or will this just not work.
If you really want to know it's State Government.

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[sstarkov]

ACOD usage in IDC is not correct solution. IMHO.

If any calls logs (DCH ?) on DID number?

 

[bignose21]

Would have thought a TSC would work, as long as trunk transfer type is allowed in the NET_DATA

 

[badtech]

Just create a phantom with DID then DCFW 4 to acod and make sure the tgar and targ doent match.

 

[sstarkov]

I agree with bignose21. Use CDP.

 

[Firebird Scrambler]

Another trick to to set up a ACD queue that is in the IDC table and NCFW the ACD queue to the ACOD of the paging route.


Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support

http://www.linkedin.com/in/davidbromley