Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Sorpio

  1. Sorpio

    500v2 Combo Card can´t make analogue to IP calls

    Strange, I got it working with moving the combocard to slot three! Any suggestions what to do next? How can I default IPO500v2? Do I need to use serial cable as in the old days or is the reset button on the back working ok?
  2. Sorpio

    500v2 Combo Card can´t make analogue to IP calls

    It doesnt work. I´ll change the slot now and will see if this make any changes :-( Where to set the codec? Under extension it is set to automatic? Can I apply anywhere else changes?
  3. Sorpio

    500v2 Combo Card can´t make analogue to IP calls

    Ok, thanks I will give it try. I already set back the IPO to default but this wasn´t working at all. Will keep you updated. Thank you very much for your support!
  4. Sorpio

    500v2 Combo Card can´t make analogue to IP calls

    And the cards! Is VCM missing? ********** Warning: TEXT Logging to File STOPPED on 1/11/2012 16:40:47 ********** 2152992mS PRN: Monitor Started IP=192.168.143.3 IP 500 V2 6.1(22) 00E007069F0C (IP Office: Supports Unicode, System Locale is deu) 2152992mS PRN: LAW=A PRI=0...
  5. Sorpio

    500v2 Combo Card can´t make analogue to IP calls

    Thanks amriddle! Here we go, I think the cards are missing. One moment will try again! This was analogue to IP! ******* Warning: Logging to Screen Started ********** 2044903mS CMCallEvt: 0.1016.0 -1 BaseEP: NEW CMEndpoint f54de020 TOTAL NOW=1 CALL_LIST=0 2044903mS CMCallEvt...
  6. Sorpio

    500v2 Combo Card can´t make analogue to IP calls

    Hi, I haven´t touched IPO for two years now but decided to move form my SMOE to IPO550v2. I have a combo card and a phone2. I can´t make calls from my POT extensions to 1616 or 9630 phone. I´m able to place calls between those two but not sure why I´m directly going to voicemail once i´m trying...
  7. Sorpio

    Same Number for Shortcode and Extension

    Hello, Scenario: Internal call to boss should be diverted to a Huntgroup. VIP Numbers should be able to call the boss. How can i do this?
  8. Sorpio

    Multicast between VLANS

    did you enable multicast routing <enable ipmcforwarding> for those vlans? then try it again! ciao
  9. Sorpio

    DHCP or BOOTPRELAY on Extreme x450a

    Hi, you to create two different udp profiles and the apply the udp-profile to the vlan <conf vlan xxx udp-prof xxx> see command ref or concept guide ciao
  10. Sorpio

    Tenovis Material

    www.algol-europe.com ask for Thomas ;-)
  11. Sorpio

    Monitor Message on SMOE

    yes, i default the system with x2, x3, and x. Pot ports don´t work!
  12. Sorpio

    Monitor Message on SMOE

    Hello, i´ve got a small office Edition. It is running hot, and the monitor and the serial port prompt 312105mS PRN: DU_SLICOFI2: chip version: V15.15 every second. Tested it with several SW versions. Any ideas? Thanks
  13. Sorpio

    Where to download Text to Speech (TTS) CD

    Hello, we ordered the Avaya IP Office TTS CD Set 700293921. But CD two from five is missing. Can anyone provide me a download source, please? Thanks an regards Sorpio
  14. Sorpio

    Good documents as guide for implementing softphones.

    i mentioned that it is better to uninstallfirst than doing an upgrade if you come from 4.1 to 4.2
  15. Sorpio

    Softphone 4.2.12 Qos DSCP???

    thanks intrigant, i already viewed yor post about ping xxxxx with -v .... a question: in the gp do i have to change settings under computerconfiguration or userconfiguration?

Part and Inventory Search

Back
Top