Recent content by smahajan

Thanks, that worked

Hi folks. I might sound stupid but I want to know where in the 1750 VPN router can you change the http password for the administrator. I did change it under Admin -> Administrator but I saw that it changed the password for only the telnet session and I could still log on to the router through...

I made a rule which would deny all "http request out" request. It is still not blocking internet from the router. What should I do?

I have a contivity 1750 router and I am trying to use the interface filters on it to block all http access from the inside LAN to outside WAN. Under current contivity interface filters, there is a "Permit HTTP" filter. When I edit it, it shows me the following rules which are currently in use:-...

I have a contivity 1750 router and I am trying to use the interface filters on it to block all http access from the inside LAN to outside WAN. Under current contivity interface filters, there is a "Permit HTTP" filter. When I edit it, it shows me the following rules which are currently in use:-...

We have a contivity 1750 VPN router and we have not purchased the stateful firewall license yet. We want to block all the http requests going from the internal network to the outside WAN. Where and how in the router do we configure that?

Thats exactly what we did last night and we are having the same problem. Did you find the solution yet? Please someone help

We changed the IP address on our CCMA and CCMS server yesterday and we are not able to pull any reports from the CCMA. When we click on a report, it just opens a blank window. We have tried to restart the services on the CCMS. They start and after few seconds, they stop. There are few service...

No I was doing it through the Server Management MMC in Small Business Server 2003

I had set up "My Documents" redirection for the users in our domain. We only have 15 users with a Windows Small Business Server 2003 Premium Edition. I just noticed that it stopped working all of a sudden 3 months ago. All the new user accounts I created in the last 3 months do not have their...

This is what I get when I do a "show boot flags" command Passport-8310:5/config# show boot flags flags autoboot true flags daylight-saving-time false flags debugmode false flags debug-config false flags factorydefaults false flags ftpd false flags jumboframe false flags nncli true flags...

We have 2 CPU's on our passport 8310 switch. 1st management port IP address is 192.168.2.1/255.255.252.0 This IP is in the same subnet as one of our internal VLANs. 2nd Management port IP address is 10.10.10.8/255.255.240.0 After reading the documentation on the switch, it was recommended...

I am logged in with the level = rwa and password = rwa I did a soft reset of the switch followed by a hard reset. It is still in the same mode. I checked and made sure that TACACS is disabled. When I telnet into the switch and login as rwa, it takes me to the following mode:- Passport-8310:5#...

Looks like you are right

Try the following:- ------------------------- On the back side of the BSR, there is a little hole which is used to reset the router to the factory default settings. Insert a needle like thing into the hole while the router is switched on. Switch the router off while the needle is still inserted...