Recent content by Savvydog

Yes, exactly!

TTT, I must say you are confusing me, but... I did exactly as you suggested. First task, the second caller got a busy signal......as I would expect. Second task, same result But I would expect that since the ACS was completely removed from the equation both times.....wouldn't I? However...

Greetings, Sorry my problem still persists. TouchToneTommy I'm confused. Currently, LINE 2 from Phone Company connects to ACS When you suggest unplugging line 2 from ACS and connecting to a single line phone, that sounds like the phone wire goes from Phone Copmpany to Single Line Phone, YES...

Thanks for trying. No call services. When Partner is removed from line 2 by powering off. Caller 1, me calling using cell phone, hears ringing. Caller 2, my assistant using cell phone, hears busy signal. When powered back on, me using cell phone gets AA. My assistant using her cell phone ten...

No, I'll start over... I have 3 lines, 1, 2 and 3. Lines 1 and 3 are not programmed for AA. I'm having no issue with Lines 1 or 3. Line 2 has AA after 4 rings. If call comes in on Line 2 and not answered, after four rings AA answers with a custom message of approximately 35 seconds in length...

I understand that. The problem is that while the AA is answering call#1 to line 2, call #2, instead of receiving a busy signal, gets answered by dead air. Each subsequent call is also answered by dead air until call#1 finally ends.

No Only line 2 by design.

I have a 4 port card installed.

For the most part my system is working, though I have a nagging issue. If a call is answered by AA and another call comes in, that second,third, etc call is answered by dead air until the original AA finishes. How can I either have call 2 receive a busy signal, or answered by an AA message...

I don't think I have Centrex. Avaya ACS R6.0 + Partner Mail VS R5.0. One AA. Four mail boxes (Press 1=ext 10, Press 2=11,Press 3=12, Press4=19)

OK, I got my Auto Attendant and PMVS working 90% thanks to many of you. Now, how can I set up such that, " Please press 4 to be connected with our doctor on call" By pressing 4, the caller will now be forwarded to phone # (510)555-1212? Thank you. Cheers!!!

Thank everyone...especially Brian, your website helped greatly!!

Thanks, but that was a typo. Only 28-31 are HG 7, rechecked and confirmed.

Greetings, This problem (Line 2 drops off after 2 rings) continues. Here is my set up: Avaya Partner ACS 5 Slot Carrier Slot 1= Avaya Partner ACS 308EC R3.0; Exts 18, 19, 20 empty, 21 empty, 22, 23, 24, 25 Slot 2= Partner Mail VS R5.0 w/ Lucent Partner Mail 4 Port Extension Card Slot 3=...

Thanks all for your comments and help. If at first you don't succeed....turn off power...then turn on. All seems well now. Cheers!!