Recent content by Rene Heuven

Thanks for the hints. I will start a few experiments (may take some time as will only be working on this during weekends). BR, Rene

Hi, I am getting CallLost(cause=124) when the IPO500 is put into a mode where all calls from a hunt group are unconditionally forwarded to a different hunt group (containing a single user). Basically the idea is that all incoming calls are diverted to the mobile phone number of this user. Here...

Hi, I have an IP Office 500 PBX. Can I program/configure the following? The user dials <gateway number><pause><phone number as dtmf>. The gateway number is configured as incoming call number in the IPO500. Now the idea is that the IPO500 will make an outgoing call using a specific SIP Trunk to...

Hi, thanks for the support. I swapped the PSU and my IP 500 now works like a charm again :). Also I have reset the security passwords back to factory default to regain administrative rights on my IP 500 using a serial cable/PUTTY on the DTE port. Of course I have changed now passwords to...

I am from the Netherlands (Enschede). We will see how I progress learning Avaya products. First the new PSU has to arrive. Best regards, Rene

OK. I intend to try/fix this myself (I consider a good exercise to get into this business: PBXs, VOIP, telephony)). I have ordered a new chassis + PSU. What Belgium company you are working for (might be useful in future for further spare parts)? Thanks for the answers! BR, Rene

Hi, I am rather new into system administrator for IP Office 500, but I have an old Avaya IP500 PBX (Avaya ID 700417207). It has been running without problems for years. Yesterday however it was powered off shortly and did not want to get up again. My assumption is that there is a problem with...