Hi Gents,
First of all, sorry for the delayed reply. 0 is configured as ATDN in ATT_DATA. If i configure 0 as scr key in 3904 it works. But we need 0 to be ATDN only.
when i call 0 from any extn for ex. 608040, the extn 180000 rings and the display in 180000 extn shows only...
Hi Guys,
This is the Scenario..
ATDN : 0
No 2250 configured
NIT_DATA
NIT1 - 180000 (3904 phone)
When any extn calls 0 (operator) extn 180000 receives the call, number is displayed but there is no name display and if 180000 is called directly then both name and number are...
Thank you for the information. I do understand that 2250 - operator console cannot be restricted. Eventually we did a work around to do something with the pretranslation table. The console takes the XLST 1 by default.
Hi
Can anyone help me in blocking the long distance and IDD calls on the 2250 console. I have a customer who wants the operator to make only local calls from the 2250 console. I tried to change the NCOS value in ATT_DATA, but all in vain. The 2250 gets unrestricted.
Thanks
Rajdhani
enable the dchannel message which would help you to know whether the call is really hitting the switch or not and also take a note of the digits sent by the service provider. the digits sent by the provider should be a valid DN of the switch
Raj
Hi
i am facing a problem in installing CP mini 1.6 After entering all the required parameters in the quick install wizard and when i click install, the page is getting expired.
would appreciate if anyone can help me on this.
Thanks
Raj
I feel MM is not able to contact switch cos u r AML link is down. Licenses of MM is validated through AUX ID of the switch.
FOX security check will pass once MM establishes connection with switch.
Can you check AML link is up .
We had a similar prob we did the following excercise
If AML link is down or not establishing then MM will hang at this point.
If AML link is down,just come out of LD 48 & log out of the PABX till u get a message AMLXXX on the terminal.
If Still there is no...
Hi
I faced similar prob , after changing the option while importing it worked,I forgot which option i chose its not standard nor call by call the third option worked.
cheers
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.