Recent content by plough

Is there a way within the Manager to force a 9608G passthrough port to: Ethernet 1000Mbps full / PC Ethernet 1000Mbps full It appears to go to auto- negotiate or a slower speed having to enter the Mute <password> # / INT to set the speed manually at the set, I would rather force it is possible...

Delete old file - Reboot - then upload new? OR Delete old - upload new - then reboot?

That will be the next step. I had hoped it was not necessary :/ - The file uploaded and played on the original upload without a reboot.

I have a 10.1 server edition: Added the HoldMusic.wav to the opt/ipoffice/system/primary directory as required through the embedded file manager. Tested and music played as expected. I want to replace that Music with new. I deleted the file with embedded file manager and loaded the new...

Often we run a Hub off the pass-through on a 9608 type set. Seems to work fine The question has been bought up - can we run multiple 9608's through 1 hub in cases where limited network drops are available? (obviously needing power since no POE is available) Thanks in advance.

(CLBD) Deactivate Calling Party Number and Name per-line blocking cpp-21 CLBA Activate Calling Party Number and Name per-line blocking The user may still request CPP by dialing the CPP code.

KC - Yes indeed - That was one of the reasons I did the reboot, to give it a swift kick in the pants. Weird thing is I can dial from here to there through our 5 digit dial plan. I would think that if the VGW was the issue it would be with all VTRK related calls...I could be very wrong about that...

GHT - Is that congestion related to Zone Bandwidth? I spot check about 6 of my other 90 sites - They all are set up for RRA with no issues. I can change it tomorrow and check....

ENtry 0 on that RLI is a VTRK (WAN) rout - The call routs from that location to another for use of Dedicated LD trunks. (We are using NRS) All other locations using the rout seem to be routing fine. I did confirm that the NRS settings match working locations. On the Call Trace I saw that the...

Changed the MFRL on RLI to 2 Had test call made and same issue persists. ( I put it back to MFRL 0 when done....)

well yes.... If you want it to actually work... (Obviously I made a typo! Thanks for catching that Eddie.)

GHT... TGAR = no KC.. I only see the MFRL on Entry 1 - I thought that the MFRL was a minimum number to match the FRL pertaining with Auth Codes? Can you help me understand before making a change? I could be very wrong...

LD 22 REQ prt TYPE asht

Distinctive ring refers more to the cadence of the ring not the "sound" of the ring From what I am reading in the Features and Services book - it looks to be only supported on Digital phones...

I have been looking over bars and can not for the life of me understand why this call is not going out over the first choice: There are 2 routs in the RLI 1st choice to 112 (WAN rout - insert 9 to another site to go out Dedicated LD trunks) 2nd choice is oout TKNA Ground start trunks. Call to...