Block DN on Other Phones

[havertyj]

I am trying to figure out how to block a DN from showing up on other phones when that person calls. I was able to get the name to not show and instead show as "XXXX", but the DN still shows up. I was able to get the name to not display by disabling the NAMA. I cannot figure out how to block the DN too.

I am using a GUI to do the programming from RSI (MerAssistant), so I am not doing this directly on the switch. I have a department that when they call out, they do not want their name, number, etc., to show up on other campus phones.

Any assistance would be appreciated.

Thank you!

John

 

[plough]

(CLBD) Deactivate Calling Party Number and Name per-line
blocking
cpp-21
CLBA Activate Calling Party Number and Name per-line
blocking
The user may still request CPP by dialing the CPP
code.

 

[jamie2]

CLS CLBA will display XXXX on other phones.

 

[havertyj]

Thank you! I tried to "cls clba" and it appears that it took. I just tried calling from the phone again and it comes through as XXXX, but the number (1893) is still displayed. I have pasted the tnb information below.

PT0000
REQ: prt
TYPE: tnb
TN 152 0 00 19
DATE
PAGE
DES

DES IP0000
TN 152 0 00 19 VIRTUAL
TYPE 2002P2
CDEN 8D
CTYP XDLC
CUST 0
NUID
NHTN
CFG_ZONE 00000
CUR_ZONE 00000
MRT
ERL 0
ECL 0
FDN
TGAR 1
LDN NO
NCOS 6
SGRP 0
RNPG 105
SCI 0
SSU
LNRS 16
XLST
CLS CTD FBD WTA LPR PUA MTD FNA HTA TDD HFA CRPD
MWA LMPN RMMD AAD IMD XHD IRA NID OLA VCE DRG1
POD SLKD CCSD SWD LNA CNDA
CFTD SFA MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBA AUTU
GPUD DPUD DNDD CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD
AHD DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC MCBN
VOLA VOUD CDMR PRED RECD MCDD T87D SBMD
KEM2 MSNV FRA PKCH MUTA MWTD DVLD CROD ELCD
CPND_LANG ENG
RCO 0
HUNT 1700
LHK 1
LPK 1
PLEV 02
PUID
UPWD
DANI NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 SCR 1893 29 MARP
CPND
NAME ENROLLMENT, MGMT2
XPLN 27
DISPLAY_FMT FIRST,LAST
01 SCR 51893 29 MARP
CPND
NAME ENROLLMENT, MGMT2
XPLN 27
DISPLAY_FMT FIRST,LAST
02 SCN 1812 0
CPND
NAME ENROLLMENT MGMT
XPLN 27
DISPLAY_FMT FIRST,LAST
03 ADL 16
04
05
06
07
08
09
10
11
12
13
14
15
16 MWK 1700
17 TRN
18 AO6
19 CFW 16
20 RGA
21 PRK
22 RNP
23
24 PRS
25 CHG
26 CPN
27
28
29
30
31
DATE 27 MAR 2014


NACT

 

[StanleySteamer]

To hide the DN for internal calls you need CLS DDGD.
CLBA is only for external calls.

 

[havertyj]

Great! That did it. Thank you so much! I made the change to cls ddgd and had them try it and it worked as they wanted. What does DDGD stand for exactly? As I mentioned, we are using a GUI to program our switch, but I do not see DDGD on any of the screens. I made the change by connecting to the switch and entering it manually for the TN.

 

[Trason]

you need this:

http://www.ghtrout.com/micromerl/index.html

(DDGA) DN Display on other set Allowed (Default)
DDGD DN Display on other set Denied

 

[havertyj]

Thanks! I downloaded the files too.

 

[Trason]

This is great(DDGD)and I have had several of our IT staff request it(they want all calls to come to the helpline first) However when they call outside, it appears as private number(no call id). I have looked through the CLS and don't see anything that does digit blocking for internal calls only.

 

[GHTROUT]

You can change the "Name" of the phone to be the Help Desk number.

For example "[highlight #EDD400]4357 Joe Smith[/highlight]" is the CPND
XXXX is the hidden DN

~~
Gene at GHTROUT.com

 

[Trason]

That is not really what i am trying to do.
I do not want the DN pushed internal.
I do want the call id pushed external.


the DDGD is doing what i want for internal. But it is causing external calls to not push any call id and appear as "private number

 

[havertyj]

This worked great as I mentioned. Now, how do I turn it off if I enabled it for a DN? I issued the command on the switch for DDGD. How do I enable that again?

Thank you!

John

 

[KCFLHRC]

How about DDGA

 

[KCFLHRC]

(DDGA) DN Display on other set Allowed dpd-21
DDGD DN Display on other set Denied

 

[havertyj]

Thanks again! That did it!