Recent content by PhoneMan02

Thanks Guys...You've been a big help!

Can't transfer to or call ext 224. Ext 224 can call other exts. The message you get is Calling 224 then Not in Service with a busy signal. I checked DND, compared set capabilities and change out phone. Thanks

all incoming calls are routed to the auto attendant to listen to a recording at which time they can enter the extension they want on wait for the operator to answer. We will changing to a Cisco VoIP System in December. Thank You every one for your responses!

CarGoSki: The bill collector asks to talk to a individual who works with us. That person ask the bill collector to send her the information but they said no they wanted payment over the phone. So yes I think they want her to pay them to go away. And it's been happening off and on for...

The other international calls we get don't cause a problem. This caller is a debt collector. He brags about being able to do this and uses foul language.

A in coming international call ties up all 7 lines on the system. Can I prevent that?

Thanks Bill... That is a big help!

Which pair on the PoE Power Data Out port supplies the 48V DC? Does it have to be plugged into the device before it puts out the power?

I fixed a problem by reseatind the card. Is that possible?

Ext 510 On incoming calls from outside the system, after a few seconds the calls line button will go out and then come back flashing as if its on hold. The user can reanswer the caller and the caller won't know she was gone they will be talking like the call was never interupted. I have replaced...

First Thanks Guys I got a PoE Injector that I replaced the Telephone Power Supply with. The Telephone Power Supply Output: 48VDC 250mA The PoE Injector Output: 48VDC 0.35A (350mA) Thanks Again Guys

I have 2 4424LD+ sets that are droping some, not all, calls! Would that be the phones or the system?

Where could I get a power supply for 4424LD+ w/ 1 DSS on a Merlin Magix. I've tried local vendors. Thanks

Ok, I forgot they needed a power supple for the display and DSS. Thanks for your help!

Ext.510 is a 4424LD+ w/ 1 DSS and the Display and DSS aint working. Ext.515 is a 4424LD+ and the display aint working. I took the phones to ext 522 which has a working 4424LD+ phone and the display worked. I did a system restore and that didnt help. Do I have 2 bad ports on this Module. Thanks