Recent content by petefish

Hello I noticed today when I was adding a J169 phone on a new demo setup I had done that there where more options in the Server settings. So when I go to Administration/IP Configuration/Servers there is option for Username and Password. I assumed that you could just put in the extension number...

Scott probably cant answer as he's on holiday but it is set as System Default. It's strange this as just started happening on 2 v11 systems.

Could it be that a useable number isn't in the User SIP settings. I know with Gamma you have to have a number in there and if you have ISDN on the Primary, once they fail over they would be rejected when they dial out.

Have any off you had this IPO500v2 v10.0.0.1.0 build53 Customer says they have had calls lost When taking the call back. So press transfer key dial extn who don't answer so take call back with appearance key and the call as gone. The phones are 5410 and 5420, I have tested and never had a...

We did have settings in this but I took them all out and they still get the same logs. I haven't used the UC Module before and was thinking it was something with that. We have took this on for maintenance and it seems like it must have been happening for a while.

Hi Guys Have any of you had this problem IPO500 v10 with v2 UC module, 2 sites linked with SCN. they only use 2 or 3 mailboxes and no email gateway. They use onexportal with the outlook integration. The It company are saying the exchange server keeps crashing because of EWS logs building...

Thanks guys I'll set that up for them.

So I can page a group of 55 phones ok, It only uses 1 port of the VCM card?

Hi Guys I have a customer with 55 1608 phones on IPO500v2 v10.1 He wants me to put all the phones in a dial paging group, but it only has a VCM32 in it am I limited to the amount of free channels on the VCM card?

Okkie thanks mate I was worried I'd have to reinstall.

Hi Guys I've just made a daft mistake. I had a problem with Licences with the WebLV on a v10 SE. So I have changed them to PLDS Nodal and now the problem with the Third party SIP extension works fine. But stupidly I went to turn the WebLV manager off and mistakenly turned off the Web Management...

I Had the same problem and had to upgrade to v10 but it works fine on that.

You did seem to get this problem for a while cant remember if it was in v9.1 or it might have started in v9.0 but it did happen for a couple of versions. It all seems ok now in v9.1.7

Sorry first time I've uploaded something.http://files.engineering.com/getfile.aspx?folder=7d83b088-6c16-4ba0-89db-24b8fc0ee6ba&file=GammaIPDCSIPTrunkconfiguration.doc

As The file shown upD:\Avaya\Avaya pdf\GammaIPDCSIPTrunkconfiguration