Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by pbxtester

  1. pbxtester

    CCT 6.0 and CS 1000

    Thank you so much!! Do you know whether or not it is possible to test this on a M1? Also using the E-LAN connection?
  2. pbxtester

    CCT and CS 1000

    Hi, I am trying to figure out how CCT and CS 1000 communicates. Does it use an AML link (if so, please give me an explanation on how this works) or does it simple connect through the E-LAN? Thank you in advance!
  3. pbxtester

    CCT 6.0 and CS 1000

    Hi, does anyone know the Communication Control Toolkit? I cannot figure out how to connect the CCT server and my switch? Is it using an AML-link or E-LAN or how does it work?
  4. pbxtester

    TM 3.1 and CS 1000 with Signaling Server

    Thank you very much. It isn't possible to connect on the T-LAN?
  5. pbxtester

    TM 3.1 and CS 1000 with Signaling Server

    Hi, ahh, that's right! That's my T-LAN addresses. My E-LAN is 20.30.40.50, 20.30.40.51 and so on. 20.30.40.50 is the switch. Do I need to connect to that?
  6. pbxtester

    TM 3.1 and CS 1000 with Signaling Server

    Hi, I've got a CS 1000 with a Signaling Server. I'm trying to setup TM 3.1 but I get an error. I cannot login to the switch. My setup is this: 10.1.2.10 = CS 1000 10.1.2.11 = SS 10.1.2.12 = MC32 (ITG Card) 10.1.2.13 = MC32 (ITG Card) This setup works very well, but I cannot setup my TM 3.1 to...
  7. pbxtester

    ITG line card problem

    It is a SMC card :-) Sorry.
  8. pbxtester

    ITG line card problem

    I am sorry - I do not think I understand. In my setup I do not need a Sig. Server in order to get this working. I am reading 553-3001-363 og 553-3001-365, but I cannot make it work!
  9. pbxtester

    ITG line card problem

    Do you know of a walkthrough or anything??
  10. pbxtester

    ITG line card problem

    Ahh, ok - thank you for the info :-) Yeah, the ELAN is configured. If I run the itgCardShow command on the ITG card it shows everything - the same if I run the pbxLinkShow command.
  11. pbxtester

    ITG line card problem

    In LD 20 I PRT the VGW and get DES LINE TN 020 0 00 0 TYPE VGW CUST 0 XTRK MC32 ZONE 001 ....... and some 30 more. The card isn't installed yet or? Thank you very much.
  12. pbxtester

    ITG line card problem

    Why do I get: stat <cardno> 00 = UNIT 00 = DSBL (TRK)(IPTN UNREG OWK /OWK ) 01 = UNIT 01 = DSBL (TRK)(IPTN UNREG OWK /OWK ) when I get this: stat <cardno> <unitno> IDLE ??
  13. pbxtester

    ITG line card problem

    Hi there I am trying to install an ITG card in my Meridian system, but I am having some problems doing that. On my call server I get the following: .stat <cardno> 00 = UNIT 00 = DSBL (TRK)(IPTN UNREG OWK /OWK ) 01 = UNIT 01 = DSBL (TRK)(IPTN UNREG OWK /OWK ) 02 = UNIT...
  14. pbxtester

    ITG line card IP address

    I have a TM - is it possible to change the IP adresse on the card via TM?
  15. pbxtester

    ITG line card IP address

    Thank you very much.
See more

Part and Inventory Search

Back
Top