Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

TM 3.1 and CS 1000 with Signaling Server

Status
Not open for further replies.

pbxtester

Technical User
Sep 13, 2007
27
DK
Hi,

I've got a CS 1000 with a Signaling Server. I'm trying to setup TM 3.1 but I get an error. I cannot login to the switch. My setup is this:

10.1.2.10 = CS 1000
10.1.2.11 = SS
10.1.2.12 = MC32 (ITG Card)
10.1.2.13 = MC32 (ITG Card)

This setup works very well, but I cannot setup my TM 3.1 to 10.1.2.10. When I telnet to 10.1.2.10 (CS1000) I get the login prompt for the SS - the same happens when I telnet to 10.1.2.11 (SS).

Is it possible to connect TM 3.1 to the CS 1000 in this setup? If I cannot do that, how do I then do it?

Thank you.
 
What kind of sw do you have on the system? Go to LD117 and type stat host and paste it here. I don't thins 10.1.2.10 is your cs1000, I think that is you node IP on the T-Lan...

I2007
 
Hi,

ahh, that's right! That's my T-LAN addresses. My E-LAN is 20.30.40.50, 20.30.40.51 and so on.

20.30.40.50 is the switch. Do I need to connect to that?
 
Yes, you have to connect to your E-Lan or ELNK address on your pabx's cpu. You find the address by:
>LD 137
.stat elnk
ELNK ENABLED
Ethernet (qu unit number 0):
Host: CS_ELAN
Internet address: xxx.xxx.xxx.xxx

I2007
 
Thank you very much.

It isn't possible to connect on the T-LAN?
 
It is possible to connect to the system through the T-Lan, just not with the TM3.1 sw if you want it to work...

I2007
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top