Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Newth

  1. Newth

    Fax setting for sip trunks

    84.13.50 is set T38 as the SIP provider supports T38 protocol. Do you need this licence for it to work properly. - LK-SYS-SIPT38-LIC SIP T.38 FAX Relay license
  2. Newth

    Faxing over voip

    Changed setting on fax machine to 9600, disabled ECM. Changed setting on NEC SV8100 to t.38 protocol and speed to 9600. Still having problems with fax loosing parts of the text and distorting other parts. In an area of Australia where they are fazing out PSTN and ISDN. So I have to use VoIP...
  3. Newth

    Faxing over voip

    Its a NEC SL1100 /SIP trunks using MyNetFone as the SIP provider.
  4. Newth

    Faxing over voip

    What setting do i change on fax machines to make it work better over SIP trunks voip ?
  5. Newth

    Fax setting for sip trunks

    Sorry its not a SL1100 its a SV8100 phone system.
  6. Newth

    Fax setting for sip trunks

    What settings on an Sl1100 NEC phone system improve fax quality when using an analoge extension for a fax. Using Sip trunks .
  7. Newth

    Panasonic TDA 200 Caller Id outgoing

    No it is not being blocked by the Telco, I changed some setting in BRI card properties that I thought were blocking it, do you know if there any where else in programming to change?
  8. Newth

    Panasonic TDA 200 Caller Id outgoing

    Hi, I have a Panasonic TDA 200 (ISDN trunks)and customer wants Caller ID outgoing to be changed from private to display the number. I have connected to the system with my PC and programmed the area I thought I had to change, but I can't get it to happen. If anyone could help that would be great...
  9. Newth

    NEC SV8100 to IP5000

    Has anyone got a configuration guide to connect a Polycom IP5000 conference phone to an SV8100?
  10. Newth

    external paging port on nec IPS 2000

    Is CM3519 and CM42 PAD control able to be used to low the input into the AMP? would this help?
  11. Newth

    external paging port on nec IPS 2000

    I finally got this external paging set up. But i get really bad feedback , is there any settings on the pabx that , I can change? Or any ideas to stop the feedback?
  12. Newth

    WebPro not working - SV8100

    try using internet explorer, to log in.
  13. Newth

    external paging port on nec IPS 2000

    thanks guys.
  14. Newth

    external paging port on nec IPS 2000

    Thanks, So I can connect a cable between a PA input (MIC) and Cot card port. Then program a access code for that port, so that the user just dials an access code to use the external PA. Also is internal paging limited to 16 digital extension? or is their all page zone?
  15. Newth

    external paging port on nec IPS 2000

    Does nec IPS 2000 pabx have external paging port ? If so on what card?
See more

Part and Inventory Search

Back
Top