Search results for query: *

84.13.50 is set T38 as the SIP provider supports T38 protocol. Do you need this licence for it to work properly. - LK-SYS-SIPT38-LIC SIP T.38 FAX Relay license

Changed setting on fax machine to 9600, disabled ECM. Changed setting on NEC SV8100 to t.38 protocol and speed to 9600. Still having problems with fax loosing parts of the text and distorting other parts. In an area of Australia where they are fazing out PSTN and ISDN. So I have to use VoIP...

Its a NEC SL1100 /SIP trunks using MyNetFone as the SIP provider.

What setting do i change on fax machines to make it work better over SIP trunks voip ?

Sorry its not a SL1100 its a SV8100 phone system.

What settings on an Sl1100 NEC phone system improve fax quality when using an analoge extension for a fax. Using Sip trunks .

No it is not being blocked by the Telco, I changed some setting in BRI card properties that I thought were blocking it, do you know if there any where else in programming to change?

Hi, I have a Panasonic TDA 200 (ISDN trunks)and customer wants Caller ID outgoing to be changed from private to display the number. I have connected to the system with my PC and programmed the area I thought I had to change, but I can't get it to happen. If anyone could help that would be great...

Has anyone got a configuration guide to connect a Polycom IP5000 conference phone to an SV8100?

Is CM3519 and CM42 PAD control able to be used to low the input into the AMP? would this help?

I finally got this external paging set up. But i get really bad feedback , is there any settings on the pabx that , I can change? Or any ideas to stop the feedback?

try using internet explorer, to log in.

thanks guys.

Thanks, So I can connect a cable between a PA input (MIC) and Cot card port. Then program a access code for that port, so that the user just dials an access code to use the external PA. Also is internal paging limited to 16 digital extension? or is their all page zone?

Does nec IPS 2000 pabx have external paging port ? If so on what card?

I now have the software for the alcatel system. Just one question when programming I/C calls can you point them to a hunt group instead of going to an attendant group?

the programing and extn were the same at site and the office. Its on copper PSTN.

Has anyone know where I can download the Application software for a Alcatel Omni iPCX office system or an install/ programming manual? Regards Dave Advanced Communications Wangaratta, Australia

I have a problem with receiving incoming caller id on my SV8100. I can receive caller ID on the PSTN line, but when I connected to the system it does not display. I have tested the system at my workshop on another PSTN line and caller ID works, but it won't work at my customer site. Regards Dave...

I am having the same problem with a Sv8100 connecting to SIP trunks from Faktortel. incoming calls OK , can't make outgoing calls. Did you find a solution?