Recent content by NECPBX

Also we found that Windows personal Firewall needs to allow ANYTHING Cisco. This was a major problem in the original deployment. Good luck

Is it possible the User is connected to a VPN....if so maybe open up proper ports.

This was known as an Offering State Bug and was resolved in an SU Patch for 9.0.2.

Thanks mextera I already had that unflagged. It actually stays connected but after awhile when you hit ex. F9 it just sits there and I have to disconnect and reconnect. It Sucks. Thanks for your reply AGAIN!

Does anyone have a fix for this? I have Matworx32 ver 11.5.2. After a couple of minutes with no activity my LAN connection disconnects. Very Annoying!

Thank You mextera it worked!

Thank You I will try that. 08>014>was a 0, 08>028>was a 0, & 08>206>was a 0 (Not Available)-changed to a 1 (Available).

We have a 2000IPS Retrofit with loopstart incoming trunks. When the operator gets a call in on rtxx and tries to transfer to a CCIS ext she has to wait until call is answered before she can release the call. Does anyone know that this is an issue with LOOPstart trunks.

Why not just move crossconnect from len to len or patch panel port to patch panel port?

Also in ARRC I believe you will need: 20<>1 also.

I'm assuming other call are going out RT 1 in 2400

Do you have access to a MAT Connection? If so: Perform listup of afrs (lfrs) See what OPR it is pointing to. Perform listup of AOPR (LOPR) Let me know!

Stupid question but is the OPR set up properly to go out correct rt in AFRS?

You might want to delete that access code so nobody else sets Voice instead of Ring. 200>A7>A163:CCC execute

No Problem!