Recent content by ndinc

Well guys I have about 17 of these ASA installed so far and thought I was getting fairly good with these. I received a new ASA configured it (so i thought) installed it. NAT work on the outside interface .193 for all and assumed we were good and I would SSH in that night and open the ports for...

I had the same problem. Update the firmware and it works like a charm. I had 3 going down periodically and i could not figure it out. The only thing they had in common was the firmware. They havent gone down in 6 months. My 2 cents. Thanks for your help

Im stupid, created another ACL with inside references to that interface. Thanks for your help

Hello all, Why is it that I cannot seem to block all traffic from the internal ip of 10.2.2.167 external 207.x.x.61. netstat on the XP station shows massive port 25 access as we as ASDM logs. I cant seem to get it to stop. Its got a Trojan know any good scna removals? Tried, Avira, Hijack...

update. I am stupid. I can acess everything from 10.1.1.x network. Thanks for your help

The VPN is working well and I have users connecting to the 10.5.5.x subnet and the split tunnel (internet access) is working and the have access the internal Exchange and Application servers. Radius is a work in progress and I am working on the IAS side of it, had it working (well at least the...

Just to update all. I fixed it it was anotehr firewall device blocking the inbound. I added a route to it and it worked like a charm. Just an FYI for anyone that runs into the same issue. Thanks for the extra help guys. Thanks for your help

crypto isakmp nat-traversal Tried it and still nothing....odd thing is I can access 10.1.1.1 a web enabled device on the internal subnet. I can ping to all servers and and devices from within the ASA 5510 CLI. Still stuck... Thanks for your help

Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp. U:\>print route Unable to initialize device PRN U:\>route print =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface...

Its up and running and I get connected but I cannot ping or see the internal DNS server 10.1.1.10 and others on 10.1.1.x subnet. Any ideas? Config below for your reference. mullervpn# sh run : Saved : ASA Version 8.2(2) ! hostname mullervpn enable password passwd names ! interface...

Thanks for the input guys. I have taken the 5510 off line and I have it back in the lab, I will clear the arp cache at the core and bring it back on line briefly to test the arp cache theory. If its not successfull I will re assign the network to another class c block that isnt being used...

I seem to be having NAT translation problems with the config above. Everything resolves to the outside interface .129 and all the other ports dont allow traffic. I had to pull it off line Friday night and put back the old firewall. I am used to ASA 5505 with only a few Vlans, I am missing...

it worked. Just to add to it. when i used one of these internal ip's (below) it still does not work, but when I use a non Global 10.1.1.123 it works fine... lobal (outside) 2 207.X.X.132 global (outside) 3 207.X.X.124 nat (inside) 3 10.1.1.4 255.255.255.255 nat (inside) 2 10.1.1.10...

Hello all. I am working on a ASA 5510 after downgrading it to 8.2 from 8.3, no time to learn a new trick. Everthing seems to be working except I cannot ping to a DNS server 68.4.16.30 on a workstation with a static at 10.1.1.4, but I can ping the dns from within the ASA. Go figure, I must be...

That explains it.... Many Thanks! Thanks for your help