ASA 5510 Syntax for NAT

[ndinc]

Cisco Adaptive Security Appliance Software Version 8.3(1)
Device Manager Version 6.3(1)
Compiled on Thu 04-Mar-10 16:56 by builders

Is there some new Syntax that I dont know about with the new 8.3.1? I keep getting the ERROR below each time I try and configure NAT. SSH, HTTP, ASDM and routing seems to be working fine. I cannot eneter ACL or NAT

mullervpn(config)# nat (inside) 1 0.0.0.0 0.0.0.0
ERROR: This syntax of nat command has been deprecated.
Please refer to "help nat" command for more details.
mullervpn(config)#

Any thoughts would be helpful.


Thanks for your help

 

[FaiTHLeSS]

there was a big change from 8.2 to 8.3 in certain commands

would be something like the following now:

object network obj-10.10.10.10
nat (inside,outside) static 123.123.123.123

firewalling has changed a bit to.

http://www.cisco.com/en/US/docs/security/asa/asa83/upgrading/migrating.html

list the changes

table 3 is the bit you will be looking for

 

[ndinc]

That explains it....

Many Thanks!

Thanks for your help