Recent content by masviss

Remove some parameters in COP CHA-COP:COPDEL,8,EOD&SFRM&BR64&TDED; Make a trial dial of the number. To return the deleted parameters, do CHA-COP:COPADD,8,EOD&SFRM&BR64&TDED;

Please show reg-cop:8;

It happens that after some time, 2-8 hours, information from a defective HD disk can be read. These are temperature defects. So do what SBCSU asked you to do. DIS-DDSM; and display the results here - thanks. ! But the HD disk is faulty anyway! What you can do can be determined experimentally.

It seems to me that this is the Hicom 300H V3.0.6 software version (P30252-N4106-B000-00). Take a high-resolution photo of all the system shelf modules for a complete understanding and photo of the processor board. You will have big problems by yourself-recovery of a disk that has a SCSI-1...

This is a package of hotfixes files V10.0.28. https://dropmefiles.com/r5gnL

A large amount of information. I'll send it through the drop zone.

Choose your option

For basic SW versions 6.2.15 and older. You need to use the instructions.

It seems to me that you need to replace CMS with CMA. This is a recommendation from the documentation. And show us the pictures Settings - Cordless - System-wide and so on.

Please show reg-sbcsu:XXXX; new manager number. reg-sbcsu:YYYY; old manager number.

Try to save the database to the SD card via Assistant T, if I remember correctly, menu item 28-2-1. You will see the function value on the phone display.

https://www.123.com

Probably, yes. Try to do it and see.

Hi! When programming ISDN, it is strictly necessary to install one master device and another slave device with the same protocol. Which side of the master is which slave doesn't matter. Usually the master is a PBX.

Try the VT100 terminal.