How do I program Account Codes in an SV8100 to work like Authorization Codes work in the IPS? The users are using an IPS where they dial 8, the Authorization Code, 1, the Long Distance # and the call goes through. When I move the users to the SV8100 they will want Account Codes to work the same...
How do I program Account Codes in an SV8100 to work like they do in the IPS? The users are using an IPS where they dial 8, the authorization code, 1, the Long Distance # and the call goes through. When I move the users to the SV8100 they will want Account Codes to work the same. Is this possible?
Thank you for your reply Belevedere.
1 Is there a way in the 8100 to see what digits are sent across the TDM CCIS span like the the commands IPMT or CCIS
trace in the 85/8300's?.
2 Do I have to setup ARS in the 8100 to be able to dial Long distance calls, local & 800 calls are working( as...
Hi guys
How do I program an SV8100 with TDM CCIS to an SV8500 as its only access to outside trunks? I inherited this system from a tech who’s just left and I can’t dial Long Distance from the 8100. Internal CCIS calls, 800 and Local calls I can dial but LD calls will not go out, either I get a...
Mr Belvedere
The site has been in for 6 months and this has never worked from this location. From Fire #1, an IPS with a TDM CCIS link to the hub it works, but not from Public Works an IP CCIS Span.
I found the following programming already done
200>B411
200>B422
8A4006>1>0061...
I have an IPS as the hub with a conference bridge in it that is used by all the other sites, the access code is #411 & #412, the SV8100’s have no problem using the conference bridge but I’ve got an IPS connected via IP CCIS back to the hub with a span of conventional CCIS to another IPS and...
What network protocols need to be installed between a MS 2010 Exchange Server and a UM8700 before I install Unified Messaging?
Are there any “Got ya’s!” to be aware of while doing this install?
Any advice is greatly appreciated.
Och aye tha noo LairdyBoy
My Bad! I left out that I need this software for an SV8500. Could you supply the same this for an SV8500 in the USA Please.
Cheers Buddy.
Where can I download the DECT phone Configurator and DECT phone Manager software to go on a WIN 7 PC and the DECT phone Advanced Data Manual with instructions on how to upgrade the DAPs?
I've looked on the web site and can't find what I need.
Thankyou 3racefan3. You were correct, I ran through combinations till I found the code:00.
Where would this be programed in the UM8700 please?
Thanks again Bruvva.
I have an SV8500 with S 03 02.05 software. I’ve got an issue when calls come into a clinic and the clerk has to send the call via a supervised transfer to a doctor and the doctor’s voicemail picks up the call after the cfna timer expires, the clerk couldn’t retrieve those call types.
I’ve set...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.