Recent content by Kevin253

Does anyone have any good documentation on how to get LAN CTE to work with Outlook 2007? Im unsure of how to set it up so that I can dial from my contacts to a VoiP phone on my desk. Thanks in advance.

I have a BCM50 REL 1 and cannot get caller line ID to appear on a 2nd incoming call transferred to handset. When the user is on the phone he wants a 2nd call transferred to him to have CLID to appear so he can make the decision to switch to the other call or not. Caller ID on the call is...

Can anyone point me to a couple good online references for CATV design? I'm trying to find out how to appropriatly size a trunk cable for CATV systems....what size P3 cable do I need etc...

So does anyone know if the phone can in fact be hot desked with other IP sets?

Can anyone confirm that the IP2033 ACU works with the BCM 400, REL 4.0 and that you can Hot Desk this IP2033 to any of the other IP phones such as the 1120E and 1140E? Any info is appreciated. Thanks.

Is there a way to turn off the call record announcement in a BCM200? It is legal in my area to not have to announce that the call is being recorded. Any help is appreciated. Thanks in advance.

were you able to get any resolution to this problem? Our BCM200 3.7 is having the same issue. Let me know how you made out. once in awhile, a reboot helps but then it goes right back to doing it again.

We have a branch office VPN setup using DSL between two locations. One end is a Contivity 221 and the head office is a Firebox 500. When the branch office users use the internet I would like to have it set up so that their traffic passes through our firebox in order to get filtered using our...

Can I still give each of them their own firewall with one IP? Would I put the DSL modem into a hub, then go from a port on the hub to a port on each firewall?

I have a customer that has two companies within his building. He has one incoming internet connection that he wants to share between the two companies. The companies need to be on two seperate secure networks yet share the same interent. One of the companies wants to set up a Branch offie VPN...

The gateway has to be my Contivity's IP, so are you saying that S1 is also that same IP? I thought S1 had to be the IP of the BCM so that it can register with the BCM.

I am having a real problem with one way speech path on two BCM's across two sites. Here is the config. Site A Contivity 1010 - x.x.1.x BCM50 - Gateway set to 1010 IP as above. IP2004 - x.x.1.x Site B Contivity 221 x.x.0.x IP2004 - x.x.0.x Gateway set to 221's IP S1 set to IP of BCM Call...

We have the gateway of the BCM setup to that already, however the phones are set to DHCP so they have the BCM set as their gateway. Should I set them to static and then set the phones gateway as the 221, NOT the BCM??

What would the default gateway on the BCM have to be set to? The address of the 221 on site A?

I am STUMPED! Here is the configuration. Site A has a BCM50 connected to a contvity 221 which is connected to DSL internet. Site A also has one IP 2004 handset that is up and running. Site B is a remote location with DSL and a IP2004 handset connected to a contivity 221. There is a Branch...