Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

VoIP AGAIN!!

Status
Not open for further replies.

Kevin253

Technical User
Dec 21, 2005
31
CA
I am having a real problem with one way speech path on two BCM's across two sites.

Here is the config.

Site A
Contivity 1010 - x.x.1.x
BCM50 - Gateway set to 1010 IP as above.
IP2004 - x.x.1.x

Site B
Contivity 221 x.x.0.x
IP2004 - x.x.0.x Gateway set to 221's IP
S1 set to IP of BCM


Call signaling happens between the two sites and Site B can hear Site A however site B cannot hear Site A.

Any ideas what I am missing?

Nortel support insists its a setting on the BCM, however I am thinking I am missing some sort of a static route on the contivity's, however am unsure of where to look.

Any help or ideas are appreciated.


Kevin


 
Check the default gateway programing on the IP sets. Bad gateway will do it everytime
set IP=10.10.11.100
S1 IP=10.10.11.1
sub=255.255.255.0
gateway=10.10.11.1

example only
 
The gateway has to be my Contivity's IP, so are you saying that S1 is also that same IP?

I thought S1 had to be the IP of the BCM so that it can register with the BCM.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top