Recent content by KarstenHuhn

Hi guys, I recently bought an SX-200 CXi from Ebay, just for fun. I already found some admin guides in the internet and I have access to official MITEL documents as well but this 200 stuff is simply too old. To complete my documents it would be great if anyone could share an Installation and...

The problem is resolved. I just copied the default system.cfg to the flash card again and the fault disappeared. Thanks for your help, guys. Karsten

Hi folks, here's what I entered (look screenshot). Still getting "Attaching network interface sw0... Error setting inet address of sw0 to 192.1681" Karstenhttps://files.engineering.com/getfile.aspx?folder=9b32d259-9f2a-49ac-80c6-9dc92b8f6813&file=Screenshot_2021-04-19_181739.jpg

Already did this... c and cd command are the same aren't they. Anyhow, tried that and it still doesn't work. VXworks still carries on to insert 192.1681 as IP address for sw0.

Hi guys, does anyone know how to correct a faulty ip address in VXworks? The boot parameters (c command) have been set properly but VXworks seems to retain fragments of a faulty IP address "in the belly" (see picture). -> "Attaching network interface sw0... Error setting inet address of sw0 to...

Wow, thank you so much for your help, AH64Armament. I'm really happy with that. I downloaded everything so you can remove the link if you want. I'll keep you updated as soon as I have new information. Kind regards Karsten

Thank you - I don't have a MOSS sheet - that's why I don't want to default it. But if you could provide SW anyway I'd be very happy - maybe I'll get access later. You can mail credentials for your dropbox to kasiwupp (at) yahoo.de Thanks a lot for your trouble. Regards Karsten

Hi folks, I recently bought a MITEL 3100 from ebay just for fun. Login screen says 4.2.3.0_UK. Unfortunately, the default system/mnet login doesn't work (protected with an unknown PW). As it is also based on VXworks I tried a few commands known from the 3300 but they don't work either. Do...

Lundah, that wouldn't help - the settings are correct, they are all the same. Mitelboy, thanks for the hint, I will try that. Thanks, Karsten

Hi, did you resolve the problem? I actually got exactly the same. It appears when I try to start synchronizing a CXi controller with a vMCD (both MiVB7.2) Karsten

The problem is resolved: The flag "Require Reliable Provisional Responses on Outgoing Calls" was set to YES but had to be NO. Karsten

Hi guys, I got an old 5140 IP Appliance from ebay and connected it to a MiCollab w/ voice, vMCD 7.0 The phone works well, even the browser, but the keys personal directory, call logs, speed dials and voice mail lack functionality. When you press one of them the screen goes blank and the arrow...

That's the point, Billz66, I'm pretty sure to send the correct calling line information, I tried every variant. And yes, you're right, incoming calls are OK, outgoing are failing.

Hi guys, system (192.168.0.91) is a MiVB7.1 with Vodafone GER SIP trunk (formerly Arcor). The system uses no MBG and communicates directly with the gateway 192.168.0.1. All settings were done according to SIP COE Mitel with VF GER. The system registers and the SIP number can be called, both way...

Thanks kwbMitel, I already assumed that :-( Karsten