Recent content by judgestone

I am a Cisco guy, and have all my Cisco Routers/Switches syslogs being sent to my linux syslog server with syslog-ng running on it, and those logs piped to MySql to allow me to view the logs web based with PHP-Syslog-ng, and all works fine. We just got two Extreme Summit X250's in and I have...

Thanks for all you alls help. I got it working this morning. It was two factors as you all stated. 1. The old 2900XL was using "isl", and I had to set it to 802 2. I had to add "all" to the switchport trunk allowed on both switch ports. It worked no problem after that.

The dotqtunneling was put there, just as a test since it was uplinking to an Avaya 363 that was passing all tags and VLANS. The CDP part I will fix, since I hadn't noticed it while trying to get the devices to talk. I have since as a test, took the 3750 and 363 out of the picture and I am now...

Also, I know that bypassing the 363 probably would do the trick, the problem with this is: 1. The buildings are kinda far apart, so 2950 LX to 2950 LX will not work. 2. 3750 to media converter to 2950 can not be done, because my company will not let me use a media converter to do this. This...

Here are the configs. I couldn't get the 363s overall config, but I do have its uplink ports to the 2950 and 3750 dot1q tag and bound to all. Will be ports gi1/0/12 on 3750s config, and port 7 on 2950's config. Here is 1st device - 7204 ! version 12.4 no service pad service tcp-keepalives-in...

I have a slight problem I am trying to fix. Here is the scenario and equipment: - Avaya 363 - 1G GBIC on port 51 (192.168.8.3) - Cisco 3750 - 1G GBIC on port Gi1/0/12, and 100MB GBIC on port Gi1/0/1 (192.168.8.251) - Cisco 2900 - 100MB fiber interface (192.168.8.36) The 363 is connected to...

I should know the answer to this; but thought I'd ask the experts first. Scenario: - Will bring up a "new" domain with Windows 2003 Servers as DCs. - Will take existing Windows 2000 "member" servers, not DCs, out of there "exisiting" domain to workgroup, and then add them to the "new" domain...

Here is the example of what I did: 1. Layer 3 Switch with vlans 10.10.60.X, 61.X, 62.X, etc. Configured routing on the switch. Default vlan ip: 10.10.60.254 and gave each of the other vlans .254. Enable groupings on it to allow them to talk to each other. 2. Pix 506e set up host networks...

Just curious as to I have looked everywhere in the PDM and other than the Logging area, I do not see exactly what I am looking for and would like to know if it is even possible. I would like to receive email alerts if a user visits inappropriate web sites, I know with sonic wall I could do...

Also, I installed the Cisco VPN client on the end users laptops and configured the newly created VPN Group. I now have access to internal network and my servers can get access to the internet after removing the old access rule for the old vpdn users.

You may also have to put in an access rule once the inside part is changed to outside. I was having the same problem; but figured it out. I will look at my config.

Got this working by removing the vpdn users and used the VPN Wizard and created a VPN group and all works fine for now.

I got it figured out. I used the ole VPN for Dummies way. I used the VPN Wizard for a Remote Access and got it working fine so far. Thanks for the reply.

Do I need to add all the bold stuff at: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080093f89.shtml

I have configured a cisco vpn client group called: cvpngrp and created a password for that group, on a pix 506e. I have configured a pool for it to use for ip addresses, 192.168.66.100 - 200. I have not messed with tunneling, etc. for now. I did set a dns server, and domain for the cvpngrp...