Cisco VPN Client Problem

[judgestone]

I have configured a cisco vpn client group called:

cvpngrp and created a password for that group, on a pix 506e.

I have configured a pool for it to use for ip addresses, 192.168.66.100 - 200.

I have not messed with tunneling, etc. for now. I did set a dns server, and domain for the cvpngrp.

I installed the cisco vpn client on my laptop. I filled in the information concerning the group and password, with transports set to IPsec over UDP (NAT/PAT).

I then used a verzion wireless card and connected to the internet, and then ran the Cisco VPN Client. It looks like it wants to connect, but then disconnects. I did enable logging on the client side and this is the error, it shows.


Cisco Systems VPN Client Version 4.6.00.0039
Copyright (C) 1998-2004 Cisco Systems, Inc. All Rights Reserved.
Client Type(s): Windows, WinNT
Running on: 5.1.2600 Service Pack 2
Config file directory: C:\Program Files\Cisco Systems\VPN Client\

1 13:16:38.459 12/06/06 Sev=Warning/2 IKE/0xE3000099
Responder cookie must be empty (PacketReceiver:765)

2 13:16:39.009 12/06/06 Sev=Warning/3 IKE/0xA300004B
Received a NOTIFY message with an invalid protocol id (0)

Could someone help me get connected or point me in the right direction?

Thanks

 

[judgestone]

Do I need to add all the bold stuff at:

http://www.cisco.com/en/US/products...s_configuration_example09186a0080093f89.shtml

 

[horus42]

See this example

http://www.cisco.com/en/US/products...ation_example09186a0080143a5d.shtml#configPIX

 

[judgestone]

I got it figured out. I used the ole VPN for Dummies way. I used the VPN Wizard for a Remote Access and got it working fine so far. Thanks for the reply.