Recent content by joezzz

these are just the parameters from the template , it doesn't say which and how to change the desired ones?

Hi all, I have this customer who has 1608 IP Phones in Low lit rooms who would like that the displays turn off when the phone sits idle for 1 minute. How do I achieve this on the IP office. Currently it takes a few hours before it goes off and they'd like that it goes off after 1 minute...

vmpro

HI ALL, just wondering if and how can calls into a business terminating at the receptionist's phone be forwarded to the Start point of Auto attendant if that call goes unanswered? thanks much

Hi again, I have an incoming call route to the main Extension 200 routed to VM:AutoAttendant thus the Auto attendant answers ok... however if I need to give the user at extn 200 the ability to reroute her incoming call route straight to her extension 200 so she could be able to answer incoming...

Hi again, I have an incoming call route to the main Extension 200 routed to VM:AutoAttendant thus the Auto attendant answers ok... however if I need to give the user at extn 200 the ability to reroute her incoming call route straight to her extension 200 so she could be able to answer incoming...

thanks much...worked!!

Hi all , I currently have an auto attendant setup on VMPRO. The Tree goes from start point-----to Test Condition (work hours) on True it goes to MENU From menu the callers have the option to dial 1-6 for six departments On False option on the TEST condition (out of work hours) the call...

Hi all, I currently have an R2 E1 circuit off a Nortel DMS via ADC Campus modems using G703 interface cards to an AVAYA IP OFFICE through a balun to the PRI card of the IP OFFICE. I have the Line setup as E1-R2 Universal 30 channels and I'm wondering why can't subscribers who block their...

HI, I currently have the sets in a USER RIGHTS as members (block all calls with authorisation code)from there the calls go to the ARS MAIN example to call the UK with the set as a member of user rights BLOCK ALL WITH CODE code------------ 01144XXXXXXXXXXXX (12 X's) Feature--------- Dial tel...

so intrigrant you're saying I do code------- 011N TEL NO ----N FEATURE----DIAL LINEGROUP--0 please correct me if I'm wrong thanks

Hi all, I have an Ip office which uses short codes on the ARS main to direct calls appropriately. i currently have example code------- 011XXXXXXXXXXXX (10 XS) TEL NO ----011N FEATURE----DIAL LINEGROUP--0 (LINE GRP 0 IS MY T1 TRUNKS) FORCED AUTH CODE THIS ABOVE WORKS WELL FOR THE UK, HOWEVER...

Hi Guys, I have an Ip Office with an E1 R2 circuit as the main trunks to it coming from a Nortel DMS100 switch.A few of the circuits on the E1 are set to NOCLI so that customers with their caller ID withheld will not show on the avaya Ip office set display.However, when a withheld caller calls...

coming from a meridian option 11 / cs1k background , that would have been very easy to configure unto the set. Is this possible? what do I have to do so that the outgoing clid to other users within the same avaya IP office won't show up on the called extension's display.

Hi all , the boss at this office wants to be able to call any extension without his name or number showing up on that person's clid display How do I go about getting this done please. Avaya ip office 9.0 500 v2 thanks much