Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by jh041497

  1. jh041497

    Cisco CUCM to Avaya Session Manager (Adaptation Module)

    Hello, I have a problem with inbound calls to Avaya Session Manager from Cisco CUCM 8.6. I was able to resolve outbound to CUCM 8.6 from Avaya Session Manager using an Adaptation Module. iosrcd=sip.mycompany.net odstd=IP.Address.of.CUCM When the CUCM 8.6 sends and inbound call in the INVITE...
  2. jh041497

    Avaya IP Phone Debug/Syslog

    Ok, probably talking to myself here but here goes! :) So a non-VPN phone works as designed. However with a VPN phone I receive a syslog message but it happens once every twenty minutes and it looks like this, NOTICE 1000 "corp login" Connected (00430 Mins:00 Failovers) through 204.X.X.X, Free...
  3. jh041497

    Avaya IP Phone Debug/Syslog

    Nobody out there has any info on this?
  4. jh041497

    Avaya IP Phone Debug/Syslog

    Ok, I'm hoping someone can set me straight. Now I'm trying to set up remote syslog / debug. I was under the impression I could configure Sys Log server and log level in the 46xxsettings file using the following. However the log level never seems to change on the phone, I have to change that...
  5. jh041497

    Connection to ADC has been lost/has resumed

    So if you receive a 200 OK and it still is happening then what?
  6. jh041497

    SM 6.1 & CM 5.2. Cannot call SIP Endpoint from H.323 device??

    I'm having an issue and hoping someone else has run across this. I have SM 6.1 connected to CM 5.2. I build my SIP endpoint hanging off of SM and I can make outbound and internal calls. However when I try to call the SIP endpoint from an H.323 phone connected to CM I get a fast busy. I've seen...
  7. jh041497

    Importing Dial Plan from one AES server to another?

    Is it possible to import the Dial plan from one AES server to another?
  8. jh041497

    AES initial configuration to CM

    Hello everyone, I am a Cisco junkie thrown into an Avaya world and now find myself struggling to keep up. I have an S8800 with System Platform 6.0.3.1.3 and AES r5-2-3-110. I have gotten this far but cannot figure out how to get the AES server to establish a connection with CM. I have gone...
  9. jh041497

    How do I print or view all my Multi-call Rings (MCR) ?

    Much appreciated and thank you for the quick response.
  10. jh041497

    How do I print or view all my Multi-call Rings (MCR) ?

    I have a Nortel 61c. How can I view all my MCR's?
  11. jh041497

    Need help setting up SIP trunk and h323 gateway

    Ok, I have Callmanager 7.0.1 running and connected to a 2811 which is in turn connected to the internet. I have a SIP DID but need some help setting it up so I can make test outbound calls. I've tried to set it up myself but keep getting fast busy when trying to make a call. My sip-register...
  12. jh041497

    Installing Call-Manager on a server

    Sent you an email, hopefully you get it. If not JAMIN dot HORTON at GMAIL dot COM.
  13. jh041497

    Installing Call-Manager on a server

    Ok, getting this install CD was harder than I thought. Any of you guys point me in the right direction?
  14. jh041497

    Installing Call-Manager on a server

    Ok, it looks as if I got an ISO copy of CUCM 6, now I just have to figure out the license issue.............
  15. jh041497

    Installing Call-Manager on a server

    Much appreciated fieryhail! I'm going to load VMWare on this G4. Now CUCM 6 is it free to? I have a Cisco Account and it looks like I can downloaded it with no issues. Is there a specific file I'm looking for? Sorry for all the questions, appreciate your help.

Part and Inventory Search

Back
Top