Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by IPOtech111

  1. IPOtech111

    User Rights Missing

    I'd be willing to bet that you consolidated the solution and lost them in the process.
  2. IPOtech111

    Call Park Not working

    Just ran into the same problem recently when using Xima MultiMedia, add ACCS_FEATUREMASK=00000005 to your NoUser Source Numbers.
  3. IPOtech111

    911 notifications in campus environment

    I am fairly certain the answer to my question is that it is not possible but thought I would check here anyway. I have a non-select server edition 11.1 with a primary server and a secondary, no local IP500's. This is a campus environment with about 10 buildings, all J series phones that...
  4. IPOtech111

    IX Workplace-Identify hunt group that is being called

    Thank you for the recommendations. There is no programmable buttons on workplace so that is not going to work for me. The tag on the ICR will not work as calls come into a main DID then hit an AA in VMPro. In a normal day scenario the calls are then transferred to a hunt group which ultimately...
  5. IPOtech111

    IX Workplace-Identify hunt group that is being called

    I have a client with a server edition R11.1.2 and using the Workplace for Windows softphone R3.25. They have many users that are members of multiple hunt groups and they need the ability to identity which hunt group is being called because they answer and handle the call differently depending on...
  6. IPOtech111

    Unable to make changes in :7070 Voicemail Pro - System Preferences

    Ever figure out the issue here? Getting the same thing.
  7. IPOtech111

    Upgrade from 11.1 GA to 11.1 SP1

    Currently in the process of upgrading from 11.1.0.0 build 237 to 11.1.0.1 build 95. This is a server edition select, single virtual primary server and a IP500 expansion. According to the 11.1 upgrade documentation regarding the special 11.1 upgrade process- "11.1GA and Future Upgrades This is...
  8. IPOtech111

    Upgrading to R11 via SD card Recreation

    I had the same thing happen to me on the last 2 upgrades I did where the config completely defaulted. In both of my cases though the IP address did not stay, the units were both 100% default following the upgrade. One was a unit in a SCN (non SE) from 7.0 to 11, upgraded by recreating the SD...
  9. IPOtech111

    Templates

    Use the "IP Office User CSV Configurator.xlxm" file found in the Manager folder.
  10. IPOtech111

    9508 phone disassemble

    9508 is alive! No DISASSEMBLE!
  11. IPOtech111

    Block caller ID on Telagility SIP trunk?

    Create a new URI on your SIP line and in the Local URI field type in Anonymous and use a different outgoing group ID than your main URI. Create a new ARS table that routes calls to the new URI's outgoing group ID. If you are using 9 as your dial access code create a new short code that uses a...
  12. IPOtech111

    Cannot change name in Manager

    Manager is installed with Admin rights and I did run it as Administrator but that did not make a difference. I do think it is a corrupted config. Saved the config and opened it on two separate PCs offline with the same issue. Thanks for the input.
  13. IPOtech111

    Cannot change name in Manager

    R9.1.10 IP500v2. Having an issue with Manager where changing a user's name, full name, or extension will not take. After changing one of the fields I click Ok, then click off to a different user then back to the user that I changed and the change didn't take and the user's name is back to what...
  14. IPOtech111

    Conference Bridge MOH issue and question

    Right click on the module to enable it, then you can view and modify it. If you do take a look at the destinations in the transfer actions, they are pretty interesting "KF:PIN=$CP1" is one of the destinations and another is "/116/$CP0:$CP0". Makes me wonder what other hidden codes you could...
  15. IPOtech111

    Conference Bridge MOH issue and question

    If you have a value entered in the user's Conference PIN field then when you join that users bridge it will prompt you for the PIN before allowing you into the bridge. I was unable to get this to work at all in the early versions of 9.1 but testing on a R9.1 SP9 system now and it does work (not...

Part and Inventory Search

Back
Top