Recent content by GTexx

Thank you very much for your help unclerico, those links were helpful. I was able to successfully configure the 3640 as an access router. I quickly learned having the async module in slot 3 wasn't the best option and moved it to slot 0 which gave me the line numbers I required. I was also...

Thanks a lot for the info. Unclerico, I will try it and see how it works out.

I think I may have posted this in the wrong thread before. I think I am in the right place now.. I am trying to set up a Lab (CCNA) using the following equipment. 1. 3640 as an Access/Terminal Server ( I will connect to this via console, I won't access via network) 2. Two 2600 series Router...

I am trying to set up a Lab (CCNA) using the following equipment. 1. 3640 as an Access/Terminal Server ( I will connect to this via console, I won't access via network) 2. Two 2600 series Router 3. One 2800 series Router 4. Another 3600 router 5. 3 Catalyst switches 12 Port, two 48 Ports...

Thanks for all the responses, fortunately I have a test Lab environment in the office where I can set-up the Cisco Lab. I have most of the tools mentioned to work with. Update: I was able to erase all the routers and switches and start from scratch. I configured the 2610xm as the Frame Switch...

Thanks for the info. I will start setting it up tomorrow and erase all the current configs on the routers. I will use the links you provided to configure each router. I will let you know how it works out. Thanks again.

Hi CiscoGuy33, Thanks for the info. it gave me alot of direction. I was able to scrounge around in our facility and I found a 2621xm, with (2) WIC-2T Serial modules in it. One in W0 and the other in W1, so that's a total of 4 serial connections from that 2621 router. 1. Can I use the 2621xm as...

I am a newby to the CCNA, I have been doing all the readings and practice exams. I now want to set up a Lab and have access to the following devices, 1. Can I set-up these equipment as a CCNA Lab 2. What kind of cables do I need to inter-connect the routers given the available modules/ports...

Hi Henry, We running multiply CS 1000M's using NICE perform and Symposium Link (CTI) or now known as CC7 Toolkit. The option we use to record is DMSIP (Dual Media Stream IP). The phones are configured with the on the call server with the following features: ICR = Allowed AST = 0 1 (for keys 0...

tnice: The end result was NICE wrote a script to correct the issues with the SQL database. After that was implemented we were able to retrieve and playback archived media. Now we are working on a new set of issues.. it never ends...

Has anyone ever ran the following command in the pdt> load, on release 5.5? If so do this impact the system in anyway? Trying to gather some information for a vendor and just want to make sure this is not service affecting in anyway. ******* See Commands below: ******* To verify the phone’s...

Thanks Crowtalks.

I found it, In the Maintenance, I went to LD 117 and then did "STIP TermIP" that printed all the detailed inluding the codec. Much appreciated.

I don't see "Resource" in Element manager, I running release 5.5, do it fall under another submenu?

Can someone remind me where to look to see the codec that the IP phones are using, I remember seeing this somewhere, but I can't recall if it was in element manager or in the PBX itself. I just want a printout to verify the codec specific 1120E/1140E phones are usings. Thanks much.