Recent content by grnichol

Thanks for all the help I have the Super loop removed and the dtr. what are the commands to remove the xpec.

OPT 81 /cs1000 I have a shelf I would like to remove. All line cards have been outed and removed except for the DTR card. What need to be done to remove this card and out this shelf so it can be removed?

I am needing some assistance on changing my outbound local PSTN calls. I believe that changing the ROUT number in the RLI will point the call to the proper route. But i need to keep the access code "9" on the digits sent. The calls are now going to another pbx to route them to the pstn.

How and where might i change that

I have a cisco call mamager tied to my CS1000 MG 5.0 with 2 qsig pri's. We have 2 pri's connecting the CS1000 to the pstn. When calls come to the nortel from the cisco the caller id and number are correct. When the cisco calls out to the pstn the caller id is being changed to the main number...

I have found a new issue, The cisco system is sending me XXX-481-7789 on a outbound call to the pstn. The nortel is changing it to xxx-482-2345 (which is the main number here). I not sure where it is inserting this number. Any help would be great.

im not using voicemail on the cisco phones, So should I turn off qmwi it is on now.

We have tied a nortel cs1000 5.0 (opt 81) to a cisco call manager with 2 qsig pri's. Every thing is working between them fine but we are now getting the following error none stop. Does any one know what might be causing this. AUD083 070A93E0 00000C87 00000000 0000DD80 00000000 00000F01...

Is there a way to use the Display "key 7" button for some thing else on a 2616 phone. Thanks

TO add a new loop do I need to add a new lincenses

i have msdl 10 and 12 i guess this new on will be 14 on the card dip switches

I am going to be using a Dch daughterboard (ntbk51aa) does this need to be assigned a loop?

that makes sence now. yes 18 19, 20 21, 22 23, 26 27, 30 31 are all open. so ill put the card in slot 2 and make it loops 20 and 21? I need to label the slots with the loop numbers.

In the core network module group 0 shelf 1 the slots numbered 1,2,3,5,7 are all open.

VERSION 3621 System type is - Communication Server 1000M MG/CP PIV CP PIV - Pentium M 1.1 GHz RELEASE 5 ISSUE 50 J + How do I print the card inventory in ld 117