Recent content by Geordie12567

I would take a guess at a QPC 84

Is there a way to determine maximum concurrent calls you can have on a SIP trunk? I checked in CUCM and Cube but do not see anything governing this.

You must have Option 2 in you package for Multi-customer operation. (Think a pretty standard option in package but verify)

IF you cannot locate a Talc card let me know. i have some in my storage. Not sure if Talc cards work with 2250 though

Unity 12.5 During Self Enrollment i am not prompted change password. IS this an option that can be enabled and disabled for self enrollment?

Do you have anything configured for LDN in your Customer Data Block?

I remember struggling with this many years ago. cannot remember how exactly i resolved. Couple of things i would suggest are 1. Try toggling SUPV on and off 2. try setting up as a tie with Sigl = lop

You should add a DMI to your RLI where the tie line is selected and insert a 9. Just trying to remember of the top of my head. 1 Go into ld 86 and build a new DGT with an insert of 9 2.In LD 86 change your RLB with the entry for the Tie line and put the DGT number under DMI.

You need to miss a pair between each unit. Unit 0 = White/Blu Blu/White Unit 1 = White/Grn Grn/White Unit 2 = White/Slt Slt/White Unit 3 = Red/Org Org/Red Unit 4 = Red/Brn Brn/Red Unit 5 = Blk/Blu Blu/Blk Unit 6 = Blk/Grn Grn Blk Unit 7 = Blk/Slate Slate/Blk

You should be connected to the 15th Pair Black/Slate right?

What version of SBC are yo running on?

Just a matter of interest are you using TCP or TLS under the SIP proxy setting on the J179 telephones?

Is it possible the signaling changed between offices, Like they were ground start at the old office and loop at the new?

Sounds like your phones have reverted to Avaya J179 (Standard SIP) as opposed to Avaya J179 (SIP Feature)" if you look under the status or under "user" it should tell you which mode you are in.

Ok finally got back to work on this and managed to get working. I had to modify the 46xxsettings.text file setting changing the SET TLSSRVRID from 1 to 0 and then the phone registered and came up with full features. Sizbut I do not have a J100Supgrade file but defaulting like you described...