Search results for query: *

I would take a guess at a QPC 84

Is there a way to determine maximum concurrent calls you can have on a SIP trunk? I checked in CUCM and Cube but do not see anything governing this.

You must have Option 2 in you package for Multi-customer operation. (Think a pretty standard option in package but verify)

IF you cannot locate a Talc card let me know. i have some in my storage. Not sure if Talc cards work with 2250 though

Unity 12.5 During Self Enrollment i am not prompted change password. IS this an option that can be enabled and disabled for self enrollment?

Do you have anything configured for LDN in your Customer Data Block?

I remember struggling with this many years ago. cannot remember how exactly i resolved. Couple of things i would suggest are 1. Try toggling SUPV on and off 2. try setting up as a tie with Sigl = lop

You should add a DMI to your RLI where the tie line is selected and insert a 9. Just trying to remember of the top of my head. 1 Go into ld 86 and build a new DGT with an insert of 9 2.In LD 86 change your RLB with the entry for the Tie line and put the DGT number under DMI.

You need to miss a pair between each unit. Unit 0 = White/Blu Blu/White Unit 1 = White/Grn Grn/White Unit 2 = White/Slt Slt/White Unit 3 = Red/Org Org/Red Unit 4 = Red/Brn Brn/Red Unit 5 = Blk/Blu Blu/Blk Unit 6 = Blk/Grn Grn Blk Unit 7 = Blk/Slate Slate/Blk

You should be connected to the 15th Pair Black/Slate right?

What version of SBC are yo running on?

Just a matter of interest are you using TCP or TLS under the SIP proxy setting on the J179 telephones?

Is it possible the signaling changed between offices, Like they were ground start at the old office and loop at the new?

Sounds like your phones have reverted to Avaya J179 (Standard SIP) as opposed to Avaya J179 (SIP Feature)" if you look under the status or under "user" it should tell you which mode you are in.

Ok finally got back to work on this and managed to get working. I had to modify the 46xxsettings.text file setting changing the SET TLSSRVRID from 1 to 0 and then the phone registered and came up with full features. Sizbut I do not have a J100Supgrade file but defaulting like you described...

Hey guys, Finally got back to trying to get my J179 working on my IP office. I currently have 9608 telephones on the system in SIP mode with a very limited feature set. Upgraded to version 11 and ordered a J179 telephone to test and see what additional features I would get, For whatever reason...

If i remember right you should only need TD, RD,GND & DTR

If you want to have callers listen to music or a recording you will need one piece of hardware, a Digital Announcer. This allows callers to listen to a delayed recording or music. It uses a trunk port and is configured in the ACD block under RAN. Even If you want callers to listen to your...

No responses yet huh. I have the same issue cannot get a J179 to register through the SBC. Have not worked on it much as of yet, was hoping to see some responses to your question. Have you made any progress yet?

Just to confirm there are other analogs within the 2nd group, Loops 32 to 63 that can break dial tone? If so, I would try downloading the controller again if no joy, replace the network card. When do these remotes disable? during midnight routines?