Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Gem257

  1. Gem257

    MICS 4.1, what kind of VM module can I set up?

    Hi all, I have a MICS 4.1 with no voicemail, the sys version is 30NcG15 NAT, and I'd like to know what kind (if any) of norstar voicemail can I set up here. There has never been a voicemail module on this system. Is it a keycoded feature and how can I tell how many ports we would get from a...
  2. Gem257

    ASM 0x8 replacement, power KSU off first or reboot?

    Hi evryone, I've recently been volunteered to manage the MICS 4.1 for our small office and I've not been in charge of administering a Norstar for several years. The ASM 0x8 that we have is dead, will not power up. We've found a replacement and I need to know how to properly replace it. Can I...
  3. Gem257

    Headset button not staying active on 7942 deskphone

    Thank you everyone for the suggestions, I've been off the grid a few days, not ignoring anyone I promise. We actually found that wiring the headset base through the handset port and ignoring the headset button on the phone seems to work fine. So long as the end user remembers to hang up the...
  4. Gem257

    Headset button not staying active on 7942 deskphone

    Hi, I hope I'm posting this question in the right place. I have a user with a 7942 deskphone and we just installed a Plantronics wireless headset (CS540) with a lifter attachment. Everything works like a charm EXCEPT when the end user presses the silver button on the headset piece to answer...
  5. Gem257

    Unable to telnet after upgrade to 7.0

    Thanks to all of you. PuTTy with SSH works great, I'll just have to bid procomm plus farewell for accessing this site.
  6. Gem257

    Unable to telnet after upgrade to 7.0

    Thanks, I'll look into SSH to connect and see what happens.
  7. Gem257

    Unable to telnet after upgrade to 7.0

    Prior to our switch being upgraded to 7.0 I could telnet through Procomm to our sig server and receive the "cslogin" prompt and work through CLI when I needed. We were at 5.0 before the upgrade. Now I don't get a response from the same IP address anymore. I've tried procomm, PuTTy, and...
  8. Gem257

    CDR format change for rls 7.0?

    I have a customer who recently had the PBX upgraded to rls 7.0 and now state that the CDR they received from an existing TTY doesn't work the same. They used HyperTerm previously and now it won't show any output. They also are looking into a third party CDR app, TapIt, and want to know if the...
  9. Gem257

    Virtual Office setup, which NTP do I need?

    Thank you, Buddy. Turns out I didn't need to sysload the switch.
  10. Gem257

    Virtual Office setup, which NTP do I need?

    Hi, I need to set up virtual office and don't know the exact NTP to guide me through the setup process. They already have the packages, and I know the set-level CLS marks to set, but I'm sure Nortel requires something on the CDB level to be set. Right now, I don't get the SCPW prompt on my TN...
  11. Gem257

    Buffers or counters to predict an INI?

    Thank you gentlemen. I've been at this for 13 years now and don't proclaim to know everything, I occasionally run into some "lesser known" facets of the switch, but had never heard of this. It could be the tech was indeed going the OT route on an unassuming customer. Who knows...
  12. Gem257

    Buffers or counters to predict an INI?

    I have a customer who states that a previous tech used to check certain "counters" or "buffers" that would increment and alert him that a manual INI ought to be performed to avoid the PBX doing an INI on its own. I don't know what kind of counters they are referring to. Anyone have any ideas?
  13. Gem257

    1120E cpnd presentation rearrangement possible?

    Thank you, Phnman. Great suggestion, I'll pass that on to the customer. I had suggested that simply replace the 1120 for this user with an 1140 to allow a larger display and more info presented. They said that would not happen, so... I'll do what I can for them. Thanks to all of you for your...
  14. Gem257

    1120E cpnd presentation rearrangement possible?

    Thank you, gwebster. They are upgrading to 7.0 this fall so I'll find out if the feature is available with that release as well.

Part and Inventory Search

Back
Top