Recent content by garyb2008

Hi How would i set a preference to route calls starting 07 down 1 of the 2 ISDN30s in a IP403 PBX with office suite 3.2 Regards

How do you make use of the H.323 feature of an old Avaya IP Office to setup a voip trunk connection? Are there suppliers of H.323 in the UK? What are the bandwidth requiremnts?

Let me put that another way - are Q931 versions backwards compatible with equipment setup for the older versions

we have a tap in call recording device setup trunk side on the ISDN, can you imagine that changing between these versions would affect it (would be moving forward not back)

That is, the UK telecoms ISDN line is Q.931 v?

Hi Is there a difference in Q.931 versions. Weve been told that a site has Q.931 V0.8 or (some version number similar), was installed 7 years ago or so. Is there a Q.931 V1, is There any difference? PS Its on an Avaya system, hence the post to this forum Regards Gary

What benefit would there be to placing the GSM gateway network side? If you don't you'll miss any outbound calls that route to mobile through the GSM device! I think were on the same page here, by putting the ISDN call thu device on the NTU side of the tap in, it means that all calls will go...

PS What is D channel messaging, why would it cause an issue? Note, we need to record outbound calls, inbound doesnt matter so much.

Hi Matt Due to the fact you say Mercom units have caused you incredible pain in the past, I can tell you are an expert in this field!!! Our Mercom unit uses ISDN taps, and there is an ethernet connection from the switch as well where it can associate outgoing calls with the extensions they...

Theres a site survey by the GSM provider.

For example, could the nature of our telecoms ISDN30 line, for which our Mercom call recording unit was set up for, be subtley different to the nature of the ISDN30 provided by the dial thru device, causing the Mercom PC to no longer work?

Im working at a system with an Avaya IP Office 403 switch with 2 PRI cards connected to our telecoms 2 ISDN30 lines. Each cable has a tap, and the 2 cables from the tap go into a PC used for call recording (from Mercom). We are thinking of placing an ISDN dial thru GSM gateway device on one of...

Can someone confirm that you can route all mobile calls (which in the UK begin with a set number of digits) down 1 of the 2 PRI cards on an old Avaya IP Office 403?

I am looking at a problem which would involve users uploading lists of records with various field structures into an application. The 2nd part of this would be to also allow the users to specify fields to capture information. This is a step beyond anything ive done up to this point where i...

our suite is version 3.1 with the 403 switch, does that still apply amriddle?