Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by FrankD001

  1. FrankD001

    Linking Mitel 2k or 3300 to Asterisk PBX via PRI

    Yes SIP trunking is an option- I was working on a proof of concept project and was trying to utilize existing hardware- SIP trunk licence would cost me $100 each (x23=$2300)- I have spare PRI cards- so hence my attempt. that project is completed and we decided to use SIP user licenses in the...
  2. FrankD001

    YA Lite

    I believe the docs say that you can have .net 2 installed but you must have 1.1 for YA to run. BTW How do you like it. I was test driving it for the softphone and I am not very happy with it as a soft phone solution.
  3. FrankD001

    ccts unseizable

    not seizable may also indicate a carrier issue. A load may help but if the issue is carrier related you will need to place a service call with them
  4. FrankD001

    5020 / 5215 IP Phones and YA

    Per the Teleworker 4.5 documentation those sets will work as teleworkers -supported- 5020,5212,5215(reg & dual mode),5220 (reg & dual mode),5224, 5235, 5330, 5340,5560
  5. FrankD001

    Linking Mitel 2k or 3300 to Asterisk PBX via PRI

    Thx for the reply. I do not have the QSIG options in my switch. I am trying to come up with a viable solution using existing hardware with out incurring additional MITEL purchases. If I can connect via existing PRI cards I can save $$ in additioal license purchases. Besides this is a proof of...
  6. FrankD001

    Linking Mitel 2k or 3300 to Asterisk PBX via PRI

    I am working on a proof of concept soft phone server project. I am trying to have my MITEL PBX be the "Telco" for a AsteriskNOW PBX. I have a Wildcard TE110p clone card (OpenVOX D100p)configured in the Asterisk system linked to an available PRI card via T1 cross over cable in a DSU in my 2K...
  7. FrankD001

    Static on Mitel 3300 Phones - Mitel 5220 IP Phone

    MitelGuy I noticed the feedback type echo on an IP set to IP set phone call within the 3300. Im my cluster I have 2-2K switchs and the 3300. All trunking goes thru the 2Ks on either PRI or DS1. I noticed this same feed back type echo at a branch which is only 3300 with copper trunks. What I saw...
  8. FrankD001

    Static on Mitel 3300 Phones - Mitel 5220 IP Phone

    I have noticed that when the volume on the 5220 sets are increased this is also increasing the microphone transmit gain. In my situation I noticed a feedback type of echo when the volume is maxed out. This is a new implemtation here in NJ. I am not sure what is the cause and am hoping for an...
See more

Part and Inventory Search

Back
Top