Recent content by fedphone

so i would like to use (2)v-9970 (or the new v-9972) connected to an analog station port called ext 123; the second v-9972 analog station port ext 456 - when you dial group 555 -it dials a group 555 which contains both ext 123 and ext 456 and all speakers would hear the audio one issue - can i...

We have a client with VALCOM SelfAmp'd speakers and they need two zones of paging - One DEPT A and One ALL CALL - why cant i take (2) analog ports of the AURA PBX and wire ANALOG1 to ZONE 1 and ANALOG2 Zone 2 (in essence and they create a GROUP CALL that calls BOTH ANALOG 1 & 2 for the ALL CALL...

Yes - i kknow what i need - but im looking for an SF Integrator with IP OFFICE experience Customer has a question - does it work

or..... do it in manager with time profile sending it to a half/day calender for 12pm til 1159pm

um.... im not the most technical guy on here - but set the GROUP to 0 and reboot and it will at a minimum disable the VPN - not sure if it will remove the VPN software

have a client that wants to do SF Integration with IP OFFICE - they currently using IP OFFICE 500 V2 with R9.0 software - they will upgrade to R11 and get the CTI Link. We are looking for assistance - the AVAYA Help desk.... no help. My distributer referred me to Esna in CA and they had like...

IPO R11 - Have ext twinning - call rings out to twinned cell - cannot hear the calling party on the cell - calling party can hear me - so im not getting talk path in both directions... Carrier says its not there issue Anyone heard of this before?

Existing IP OFFICE client wants to integrate SalesForce with existing IP OFFICE R11; looking for two things A remote tech who can do that installation (obviously billable) preferable on a contract basis (flat rate not hourly) Customer looking for a reference of client who has "lived thru"...

anyone know if ADI is just down or has avaya removed the site pushing us to PLDS licensing just wondering

they are lazy? they have a 4 line copper hunt group that plays busy to the 5th caller - they want to emulate that

Its a complicated one IPO 500 R9.1 with VMPro PRI with 8 Voice Channels Full AutoAttendant Client wants ONLY 4 calls to a particular DID to be answered in the office at anytime - 5th call to play busy to a particular DID with rings to AA - so i have to figure out a way to make the 5th call...

so previously he had a Rockwell set on his desk...now looks like he has a cisco and a 9600 series ,,,, any idea how long hes been back on avaya? wonder if he used the win-back rebate? any one have a pic of barry using the AVAYA handset...

Has anyone had an issue with Twinning on SIP Lines? I have 4 SIP Trunks (thru Flowroute) and the call comes in; rings and twins to the cell. When I answer on the cell I can count to 8 before the calling party hears me. its like the talkpath isn't setting up on answer. I have changed the...

Yup they are both set to 2 seconds already

I have a stumper..... IPO 9.0.7.983 - calls ring into system on SIP Trunk - call TWINS to my cell phone - i see the caller id of the calling party - i answer - NO TALK PATH - the caller - STILL HEARS RINGING - i hang up, a few seconds later the call rings BACK to my cell and i answer again -...