Recent content by effectivecommunicat

We have an IPOSE at R11 and are using remote SIP phones with 3rd party certs that is used for J179 phones and IX Workplace. The server is hosted at a datacenter on Hyper-V so that we connect to via SD-WAN. The phones are able to register over the SD-WAN to the LAN1 of the IPOSE and same for...

I think i already know the answer, but thought I would check. I have a customer with a 500v2 at R11 and looking to add an Avaya SBC (portwell appliance version) for connecting remote J179s and IX Workplace users. They want to use the SoftConsole app remotely, but do not allow at home workers...

I have a strange one that i assume is tied to the firewall VPN, but need to know what ports or items on a firewall could be blocking this. Customer changed firewalls and now the remote 500v2 is connected via SCN and calls route, but the remote site shows voicemail pro as none in system status...

Thansk TTT! effectivecommunicat ACIS, ACSS Certified

Wondering if anyone out there knows of a good way to migrate ~100 Users that were programmed off a 500v2 expansion in an IPOSE deployment over to the Primary server. I know they can export/import via CSV but it would not have any User Rights, Hunt Group, etc. information. Not sure if copying...

Thank you! effectivecommunicat ACIS, ACSS Certified

Sorry, maybe i should have been more clear. After port forwarding 411 everything is working correctly and the phone was able to connect. Thanks for all the assistance. My follow up question was more on any specific suggestions on hardening the security. effectivecommunicat ACIS, ACSS Certified

Thanks! Used the site to verify the certificate was good and the 411 forwarding allowed the phone to connect. I also opened port 443 in order to verify the certificate and Im wondering if I need to leave it open or if i should remove the port forwarding..? Looking through the R11 Security...

Thanks derfloh! Is there a way to verify/test the certificates were correctly configured? Again, thank you! effectivecommunicat ACIS, ACSS Certified

Hi All, Looking for assistance on making a secure remote worker (without SBCE and using NAT)on a J179. We have the 3rd party certificates installed and have port forwarded just the TLS 5061 and RTP/NAT ports. Equinox/IX Workplace works on a PC and iphone, but unable to get a J179 phone to...

Thank you. I will confirm the Samba version and try disabling and have them re-scan. Just to confirm - The revision of Samba is a part of the R11.0.4.1 OVA/ISO. They are at R11.0.2 right now so if we upgrade the feature pack/service pack that would also update the Samba. Avaya IPOSS team was...

We have a IPOSE at R11 (upgraded recently in an attempt to correct this per Avaya's documents) https://downloads.avaya.com/css/P8/documents/101040958 The critical vulnerability still appears in our Nexpose Security Console "Samba CVE-2017-7494: Remote code execution from a writable share"...

Yes, you can do this. To enable this in R9 go to System->Twinning and check the box that states "send original calling party information for mobile twinning" (in later releases it is on the Line/PRI tab). Sometimes the PRI provider will block outbound calls trying to pass out a number that is...

Thanks Pepp77! effectivecommunicat ACIS, ACSS Certified

Thanks for the reply Pepp77. I am hoping it is that easy, but wasn't sure if there are specific details that need to match the existing server. We we're going to have them spec the VMware appropriately and give the same LAN1/LAN2 IPs and try the backup/restore. I assume all AA menu/voicemail...